How to optimize for speed
scikit-learn Docs · نسخهٔ 5e9184e53cd3 · BSD-3-Clause
=========================
How to optimize for speed
The following gives some practical guidelines to help you write efficient code for the scikit-learn project.
While it is always useful to profile your code so as to check performance assumptions, it is also highly recommended to review the literature to ensure that the implemented algorithm is the state of the art for the task before investing into costly implementation optimization.
Times and times, hours of efforts invested in optimizing complicated implementation details have been rendered irrelevant by the subsequent discovery of simple algorithmic tricks, or by using another algorithm altogether that is better suited to the problem.
The section warm-restarts gives an example of such a trick.
Python, Cython or C/C++?
In general, the scikit-learn project emphasizes the readability of the source code to make it easy for the project users to dive into the source code so as to understand how the algorithm behaves on their data but also for ease of maintainability (by the developers).
When implementing a new algorithm is thus recommended to start implementing it in Python using Numpy and Scipy by taking care of avoiding looping code using the vectorized idioms of those libraries. In practice this means trying to replace any nested for loops by calls to equivalent Numpy array methods. The goal is to avoid the CPU wasting time in the Python interpreter rather than crunching numbers to fit your statistical model. It's generally a good idea to consider NumPy and SciPy performance tips: https://scipy.github.io/old-wiki/pages/PerformanceTips
Sometimes however an algorithm cannot be expressed efficiently in simple vectorized Numpy code. In this case, the recommended strategy is the following:
- Profile the Python implementation to find the main bottleneck and
isolate it in a dedicated module level function. This function will be reimplemented as a compiled extension module.
- If there exists a well maintained BSD or MIT C/C++ implementation
of the same algorithm that is not too big, you can write a Cython wrapper for it and include a copy of the source code of the library in the scikit-learn source tree: this strategy is used for the classes svm.LinearSVC, svm.SVC and linear_model.LogisticRegression (wrappers for liblinear and libsvm).
- Otherwise, write an optimized version of your Python function using
Cython directly. This strategy is used for the linear_model.ElasticNet and linear_model.SGDClassifier classes for instance.
- Move the Python version of the function in the tests and use
it to check that the results of the compiled extension are consistent with the gold standard, easy to debug Python version.
- Once the code is optimized (not simple bottleneck spottable by
profiling), check whether it is possible to have coarse grained parallelism that is amenable to multi-processing by using the `joblib.Parallel` class.
Profiling Python code
In order to profile Python code we recommend to write a script that loads and prepare you data and then use the IPython integrated profiler for interactively exploring the relevant part for the code.
Suppose we want to profile the Non Negative Matrix Factorization module of scikit-learn. Let us setup a new IPython session and load the digits dataset and as in the sphx_glr_auto_examples_classification_plot_digits_classification.py example::
In [1]: from sklearn.decomposition import NMF
In [2]: from sklearn.datasets import load_digits
In [3]: X, _ = load_digits(return_X_y=True)
Before starting the profiling session and engaging in tentative optimization iterations, it is important to measure the total execution time of the function we want to optimize without any kind of profiler overhead and save it somewhere for later reference::
In [4]: %timeit NMF(n_components=16, tol=1e-2).fit(X) 1 loops, best of 3: 1.7 s per loop
To have a look at the overall performance profile using the `%prun` magic command::
In [5]: %prun -l nmf.py NMF(n_components=16, tol=1e-2).fit(X) 14496 function calls in 1.682 CPU seconds
Ordered by: internal time List reduced from 90 to 9 due to restriction <'nmf.py'>
ncalls tottime percall cumtime percall filename:lineno(function) 36 0.609 0.017 1.499 0.042 nmf.py:151(_nls_subproblem) 1263 0.157 0.000 0.157 0.000 nmf.py:18(_pos) 1 0.053 0.053 1.681 1.681 nmf.py:352(fit_transform) 673 0.008 0.000 0.057 0.000 nmf.py:28(norm) 1 0.006 0.006 0.047 0.047 nmf.py:42(_initialize_nmf) 36 0.001 0.000 0.010 0.000 nmf.py:36(_sparseness) 30 0.001 0.000 0.001 0.000 nmf.py:23(_neg) 1 0.000 0.000 0.000 0.000 nmf.py:337(__init__) 1 0.000 0.000 1.681 1.681 nmf.py:461(fit)
The `tottime column is the most interesting: it gives the total time spent executing the code of a given function ignoring the time spent in executing the sub-functions. The real total time (local code + sub-function calls) is given by the cumtime` column.
Note the use of the `-l nmf.py` that restricts the output to lines that contain the "nmf.py" string. This is useful to have a quick look at the hotspot of the nmf Python module itself ignoring anything else.
Here is the beginning of the output of the same command without the `-l nmf.py` filter::
In [5] %prun NMF(n_components=16, tol=1e-2).fit(X) 16159 function calls in 1.840 CPU seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function) 2833 0.653 0.000 0.653 0.000 {numpy.core._dotblas.dot} 46 0.651 0.014 1.636 0.036 nmf.py:151(_nls_subproblem) 1397 0.171 0.000 0.171 0.000 nmf.py:18(_pos) 2780 0.167 0.000 0.167 0.000 {method 'sum' of 'numpy.ndarray' objects} 1 0.064 0.064 1.840 1.840 nmf.py:352(fit_transform) 1542 0.043 0.000 0.043 0.000 {method 'flatten' of 'numpy.ndarray' objects} 337 0.019 0.000 0.019 0.000 {method 'all' of 'numpy.ndarray' objects} 2734 0.011 0.000 0.181 0.000 fromnumeric.py:1185(sum) 2 0.010 0.005 0.010 0.005 {numpy.linalg.lapack_lite.dgesdd} 748 0.009 0.000 0.065 0.000 nmf.py:28(norm) ...
The above results show that the execution is largely dominated by dot product operations (delegated to blas). Hence there is probably no huge gain to expect by rewriting this code in Cython or C/C++: in this case out of the 1.7s total execution time, almost 0.7s are spent in compiled code we can consider optimal. By rewriting the rest of the Python code and assuming we could achieve a 1000% boost on this portion (which is highly unlikely given the shallowness of the Python loops), we would not gain more than a 2.4x speed-up globally.
Hence major improvements can only be achieved by algorithmic improvements in this particular example (e.g. trying to find operations that are both costly and useless to avoid computing them rather than trying to optimize their implementation).
It is however still interesting to check what's happening inside the `_nls_subproblem function which is the hotspot if we only consider Python code: it takes around 100% of the accumulated time of the module. In order to better understand the profile of this specific function, let us install line_profiler` and wire it to IPython:
$ pip install line_profilerNow restart IPython and let us use this new toy::
In [1]: %load_ext line_profiler
In [2]: from sklearn.datasets import load_digits
In [3]: from sklearn.decomposition import NMF ... : from sklearn.decomposition._nmf import _nls_subproblem
In [4]: X, _ = load_digits(return_X_y=True)
In [5]: %lprun -f _nls_subproblem NMF(n_components=16, tol=1e-2).fit(X) Timer unit: 1e-06 s
File: sklearn/decomposition/nmf.py Function: _nls_subproblem at line 137 Total time: 1.73153 s
Line # Hits Time Per Hit % Time Line Contents
137 def _nls_subproblem(V, W, H_init, tol, max_iter): 138 """Non-negative least square solver ... 170 """ 171 48 5863 122.1 0.3 if (H_init < 0).any(): 172 raise ValueError("Negative values in H_init passed to NLS solver.") 173 174 48 139 2.9 0.0 H = H_init 175 48 112141 2336.3 5.8 WtV = np.dot(W.T, V) 176 48 16144 336.3 0.8 WtW = np.dot(W.T, W) 177 178 # values justified in the paper 179 48 144 3.0 0.0 alpha = 1 180 48 113 2.4 0.0 beta = 0.1 181 638 1880 2.9 0.1 for n_iter in range(1, max_iter + 1): 182 638 195133 305.9 10.2 grad = np.dot(WtW, H) - WtV 183 638 495761 777.1 25.9 proj_gradient = norm(grad[np.logical_or(grad < 0, H > 0)]) 184 638 2449 3.8 0.1 if proj_gradient < tol: 185 48 130 2.7 0.0 break 186 187 1474 4474 3.0 0.2 for inner_iter in range(1, 20): 188 1474 83833 56.9 4.4 Hn = H - alpha * grad 189 # Hn = np.where(Hn > 0, Hn, 0) 190 1474 194239 131.8 10.1 Hn = _pos(Hn) 191 1474 48858 33.1 2.5 d = Hn - H 192 1474 150407 102.0 7.8 gradd = np.sum(grad * d) 193 1474 515390 349.7 26.9 dQd = np.sum(np.dot(WtW, d) * d) ...
By looking at the top values of the `% Time` column it is really easy to pin-point the most expensive expressions that would deserve additional care.
Memory usage profiling
Peak memory
Peak memory, i.e. the highest level of memory usage for a program, can be a bottleneck when processing large amounts of data. You can use memray <https://bloomberg.github.io/memray/>_ to measure peak memory, and discover the responsible code. In particular, it will tell you which Python callstacks were responsible for allocating the various allocations that led to peak memory.
First, install the latest version:
$ pip install -U memrayThen, run a script using the relevant code under `memray`:
$ memray run example.pyIt will tell you where it wrote the resulting data::
Writing profile results into memray-example.py.123.bin
You can then convert this data into an HTML report:
$ memray flamegraph memray-example.py.123.binIn this case it will generate a file called "memray-flamegraph-example.py.123.html" which you can then open in a browser. If you are not familiar with flamegraphs, see Memray's docs <https://bloomberg.github.io/memray/flamegraph.html>_ for an introduction.
Memory leaks
You can analyze the memory usage changes of any Python code with the help of memory_profiler <https://pypi.org/project/memory_profiler/>_. It works by measuring how much memory usage has changed between the start of a line of code and the end of a line of code. As a result, it is less useful for discovering peak memory usage: it cannot detect any memory that is allocated and then immediately released while the line of code is executing, even if it's a large amount.
First, install the latest version:
$ pip install -U memory_profilerThen, setup the magics in a manner similar to `line_profiler`::
In [1] %load_ext memory_profiler
This will register the `%memit and %mprun` magic commands in the IPython terminal application and the other frontends such as qtconsole and notebook.
`%mprun is useful to examine, line-by-line, the memory usage of key functions in your program. It is very similar to %lprun, discussed in the previous section. For example, from the memory_profiler examples` directory::
In [2] from example import my_func
In [3] %mprun -f my_func my_func() Filename: example.py
Line # Mem usage Increment Line Contents
3 @profile 4 5.97 MB 0.00 MB def my_func(): 5 13.61 MB 7.64 MB a = [1] * (10 6) 6 166.20 MB 152.59 MB b = [2] * (2 * 10 7) 7 13.61 MB -152.59 MB del b 8 13.61 MB 0.00 MB return a
Another useful magic that `memory_profiler defines is %memit, which is analogous to %timeit`. It can be used as follows::
In [1] %load_ext memory_profiler
In [2]: import numpy as np
In [3]: %memit np.zeros(1e7) maximum of 3: 76.402344 MB per loop
For more details, see the docstrings of the magics, using `%memit? and %mprun?`.
Using Cython
If profiling of the Python code reveals that the Python interpreter overhead is larger by one order of magnitude or more than the cost of the actual numerical computation (e.g. `for loops over vector components, nested evaluation of conditional expression, scalar arithmetic...), it is probably adequate to extract the hotspot portion of the code as a standalone function in a .pyx` file, add static type declarations and then use Cython to generate a C program suitable to be compiled as a Python extension module.
The Cython's documentation <https://docs.cython.org/>_ contains a tutorial and reference guide for developing such a module. For more information about developing in Cython for scikit-learn, see cython.
Profiling compiled extensions
When working with compiled extensions (written in C/C++ with a wrapper or directly as Cython extension), the default Python profiler is useless: we need a dedicated tool to introspect what's happening inside the compiled extension itself.
Using yep and gperftools
Easy profiling without special compilation options use yep:
- https://pypi.org/project/yep/
- https://fa.bianp.net/blog/2011/a-profiler-for-python-extensions
Using a debugger, gdb
- It is helpful to use `
gdb` to debug. In order to do so, one must use
a Python interpreter built with debug support (debug symbols and proper optimization). To create a new conda environment (which you might need to deactivate and reactivate after building/installing) with a source-built CPython interpreter:
git clone https://github.com/python/cpython.git
conda create -n debug-scikit-dev
conda activate debug-scikit-dev
cd cpython
mkdir debug
cd debug
../configure --prefix=$CONDA_PREFIX --with-pydebug
make EXTRA_CFLAGS='-DPy_DEBUG' -j<num_cores>
make installUsing gprof
In order to profile compiled Python extensions one could use `gprof after having recompiled the project with gcc -pg and using the python-dbg variant of the interpreter on debian / ubuntu: however this approach requires to also have numpy and scipy recompiled with -pg` which is rather complicated to get working.
Fortunately there exist two alternative profilers that don't require you to recompile everything.
Using valgrind / callgrind / kcachegrind
kcachegrind
`yep can be used to create a profiling report. kcachegrind` provides a graphical environment to visualize this report:
$ # Run yep to profile some python script
$ python -m yep -c my_file.py$ # open my_file.py.callgrin with kcachegrind
$ kcachegrind my_file.py.prof`yep can be executed with the argument --lines or -l` to compile a profiling report 'line by line'.
Multi-core parallelism using `joblib.Parallel`
See joblib documentation <https://joblib.readthedocs.io>_
A simple algorithmic trick: warm restarts
See the glossary entry for warm_start