:mod:`!venv` --- Creation of virtual environments

فهرست فصل‌ها دانلود آرشیوناشر

Python 3.14 Docs · نسخهٔ 3.14.10 · PSF License

:mod:!venv --- Creation of virtual environments

:synopsis: Creation of virtual environments.

Source code: Lib/venv/

--------------

The !venv module supports creating lightweight "virtual environments", each with their own independent set of Python packages installed in their site directories. A virtual environment is created on top of an existing Python installation, known as the virtual environment's "base" Python, and by default is isolated from the packages in the base environment, so that only those explicitly installed in the virtual environment are available. See sys-path-init-virtual-environments and site's virtual environments documentation <site-virtual-environments-configuration> for more information.

When used from within a virtual environment, common installation tools such as pip will install Python packages into a virtual environment without needing to be told to do so explicitly.

A virtual environment is (amongst other things):

  • Used to contain a specific Python interpreter and software libraries and

binaries which are needed to support a project (library or application). These are by default isolated from software in other virtual environments and Python interpreters and libraries installed in the operating system.

  • Contained in a directory, conventionally named `.venv or venv` in

the project directory, or under a container directory for lots of virtual environments, such as `~/.virtualenvs`.

  • Not checked into source control systems such as Git.
  • Considered as disposable -- it should be simple to delete and recreate it from

scratch. You don't place any project code in the environment.

  • Not considered as movable or copyable -- you just recreate the same

environment in the target location.

See 405 for more background on Python virtual environments.

Python Packaging User Guide: Creating and using virtual environments <https://packaging.python.org/guides/installing-using-pip-and-virtual-environments/#create-and-use-virtual-environments>__

Creating virtual environments

Virtual environments <venv-def> are created by executing the `venv` module:

shell
python -m venv /path/to/new/virtual/environment

This creates the target directory (including parent directories as needed) and places a pyvenv.cfg file in it with a `home key pointing to the Python installation from which the command was run. It also creates a bin (or Scripts on Windows) subdirectory containing a copy or symlink of the Python executable (as appropriate for the platform or arguments used at environment creation time). It also creates a lib/pythonX.Y/site-packages subdirectory (on Windows, this is Lib\\site-packages`). If an existing directory is specified, it will be re-used.

The use of `venv` is now recommended for creating virtual environments.

pyvenv was the recommended tool for creating virtual environments for Python 3.3 and 3.4, and replaced in 3.5 by executing `venv` directly.

On Windows, invoke the `venv` command as follows:

ps1con
PS> python -m venv C:\path\to\new\virtual\environment

The command, if run with `-h`, will show the available options::

usage: venv [-h] [--system-site-packages] [--symlinks | --copies] [--clear] [--upgrade] [--without-pip] [--prompt PROMPT] [--upgrade-deps] [--without-scm-ignore-files] ENV_DIR [ENV_DIR ...]

Creates virtual Python environments in one or more target directories.

Once an environment has been created, you may wish to activate it, e.g. by sourcing an activate script in its bin directory.

A required argument specifying the directory to create the environment in.

Give the virtual environment access to the system site-packages directory.

Try to use symlinks rather than copies, when symlinks are not the default for the platform.

Try to use copies rather than symlinks, even when symlinks are the default for the platform.

Delete the contents of the environment directory if it already exists, before environment creation.

Upgrade the environment directory to use this version of Python, assuming Python has been upgraded in-place.

Skips installing or upgrading pip in the virtual environment (pip is bootstrapped by default).

Provides an alternative prompt prefix for this environment.

Upgrade core dependencies (pip) to the latest version in PyPI.

Skips adding SCM ignore files to the environment directory (Git is supported by default).

Installs pip by default, added the `--without-pip and --copies` options.

In earlier versions, if the target directory already existed, an error was raised, unless the `--clear or --upgrade` option was provided.

Add `--upgrade-deps` option to upgrade pip + setuptools to the latest on PyPI.

`setuptools` is no longer a core venv dependency.

Added the `--without-scm-ignore-files option. venv now creates a .gitignore` file for Git by default.

While symlinks are supported on Windows, they are not recommended. Of particular note is that double-clicking `python.exe` in File Explorer will resolve the symlink eagerly and ignore the virtual environment.

On Microsoft Windows, it may be required to enable the `Activate.ps1` script by setting the execution policy for the user. You can do this by issuing the following PowerShell command:

powershell
   PS C:\> Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

See `About Execution Policies
<https://go.microsoft.com/fwlink/?LinkID=135170>`_
for more information.

The created pyvenv.cfg file also includes the `include-system-site-packages key, set to true if venv is run with the --system-site-packages option, false` otherwise.

Unless the `--without-pip option is given, ensurepip will be invoked to bootstrap pip` into the virtual environment.

Multiple paths can be given to `venv`, in which case an identical virtual environment will be created, according to the given options, at each provided path.

How venvs work

When a Python interpreter is running from a virtual environment, sys.prefix and sys.exec_prefix point to the directories of the virtual environment, whereas sys.base_prefix and sys.base_exec_prefix point to those of the base Python used to create the environment. It is sufficient to check `sys.prefix != sys.base_prefix` to determine if the current interpreter is running from a virtual environment.

A virtual environment may be "activated" using a script in its binary directory (`bin on POSIX; Scripts on Windows). This will prepend that directory to your PATH, so that running python will invoke the environment's Python interpreter and you can run installed scripts without having to use their full path. The invocation of the activation script is platform-specific ({<venv>}` must be replaced by the path to the directory containing the virtual environment):

+-------------+------------+--------------------------------------------------+

PlatformShellCommand to activate virtual environment

+=============+============+==================================================+

POSIXbash/zsh$ source {<venv>}/bin/activate
+------------+--------------------------------------------------+
fish$ source {<venv>}/bin/activate.fish
+------------+--------------------------------------------------+
csh/tcsh$ source {<venv>}/bin/activate.csh
+------------+--------------------------------------------------+
pwsh$ {<venv>}/bin/Activate.ps1

+-------------+------------+--------------------------------------------------+

Windowscmd.exeC:\\> {<venv>}\\Scripts\\activate.bat
+------------+--------------------------------------------------+
PowerShellPS C:\\> {<venv>}\\Scripts\\Activate.ps1

+-------------+------------+--------------------------------------------------+

fish and csh activation scripts.

PowerShell activation scripts installed under POSIX for PowerShell Core support.

You don't specifically *need* to activate a virtual environment, as you can just specify the full path to that environment's Python interpreter when invoking Python. Furthermore, all scripts installed in the environment should be runnable without activating it.

In order to achieve this, scripts installed into virtual environments have a "shebang" line which points to the environment's Python interpreter, #!/{<path-to-venv>}/bin/python. This means that the script will run with that interpreter regardless of the value of PATH. On Windows, "shebang" line processing is supported if you have the launcher installed. Thus, double-clicking an installed script in a Windows Explorer window should run it with the correct interpreter without the environment needing to be activated or on the PATH.

When a virtual environment has been activated, the !VIRTUAL_ENV environment variable is set to the path of the environment. Since explicitly activating a virtual environment is not required to use it, !VIRTUAL_ENV cannot be relied upon to determine whether a virtual environment is being used.

environment to be activated, their shebang lines contain the absolute paths to their environment's interpreters. Because of this, environments are inherently non-portable, in the general case. You should always have a simple means of recreating an environment (for example, if you have a requirements file `requirements.txt, you can invoke pip install -r requirements.txt using the environment's pip` to install all of the packages needed by the environment). If for any reason you need to move the environment to a new location, you should recreate it at the desired location and delete the one at the old location. If you move an environment because you moved a parent directory of it, you should recreate the environment in its new location. Otherwise, software installed into the environment may not work as expected.

You can deactivate a virtual environment by typing `deactivate` in your shell. The exact mechanism is platform-specific and is an internal implementation detail (typically, a script or shell function will be used).

API

The high-level method described above makes use of a simple API which provides mechanisms for third-party virtual environment creators to customize environment creation according to their needs, the EnvBuilder class.

symlinks=False, upgrade=False, with_pip=False, \ prompt=None, upgrade_deps=False, \ *, scm_ignore_files=frozenset())

The EnvBuilder class accepts the following keyword arguments on instantiation:

  • *system_site_packages* -- a boolean value indicating that the system Python

site-packages should be available to the environment (defaults to `False`).

  • *clear* -- a boolean value which, if true, will delete the contents of

any existing target directory, before creating the environment.

  • *symlinks* -- a boolean value indicating whether to attempt to symlink the

Python binary rather than copying.

  • *upgrade* -- a boolean value which, if true, will upgrade an existing

environment with the running Python - for use when that Python has been upgraded in-place (defaults to `False`).

  • *with_pip* -- a boolean value which, if true, ensures pip is

installed in the virtual environment. This uses ensurepip with the `--default-pip` option.

  • *prompt* -- a string to be used after virtual environment is activated

(defaults to `None which means directory name of the environment would be used). If the special string "."` is provided, the basename of the current directory is used as the prompt.

  • *upgrade_deps* -- Update the base venv modules to the latest on PyPI
  • *scm_ignore_files* -- Create ignore files based for the specified source

control managers (SCM) in the iterable. Support is defined by having a method named `create_{scm}_ignore_file. The only value supported by default is "git" via create_git_ignore_file`.

Added the `with_pip` parameter

Added the `prompt` parameter

Added the `upgrade_deps` parameter

Added the `scm_ignore_files` parameter

EnvBuilder may be used as a base class.

Create a virtual environment by specifying the target directory (absolute or relative to the current directory) which is to contain the virtual environment. The `create` method will either create the environment in the specified directory, or raise an appropriate exception.

The `create method of the EnvBuilder` class illustrates the hooks available for subclass customization::

def create(self, env_dir): """ Create a virtualized Python environment in a directory. env_dir is the target directory to create an environment in. """ env_dir = os.path.abspath(env_dir) context = self.ensure_directories(env_dir) self.create_configuration(context) self.setup_python(context) self.setup_scripts(context) self.post_setup(context)

Each of the methods ensure_directories, create_configuration, setup_python, setup_scripts and post_setup can be overridden.

Creates the environment directory and all necessary subdirectories that don't already exist, and returns a context object. This context object is just a holder for attributes (such as paths) for use by the other methods. If the EnvBuilder is created with the arg `clear=True`, contents of the environment directory will be cleared and then all necessary subdirectories will be recreated.

The returned context object is a types.SimpleNamespace with the following attributes:

  • `env_dir` - The location of the virtual environment. Used for

`__VENV_DIR__ in activation scripts (see install_scripts`).

  • `env_name` - The name of the virtual environment. Used for

`__VENV_NAME__ in activation scripts (see install_scripts`).

  • `prompt` - The prompt to be used by the activation scripts. Used for

`__VENV_PROMPT__ in activation scripts (see install_scripts`).

  • `executable` - The underlying Python executable used by the virtual

environment. This takes into account the case where a virtual environment is created from another virtual environment.

  • `inc_path` - The include path for the virtual environment.
  • `lib_path` - The purelib path for the virtual environment.
  • `bin_path` - The script path for the virtual environment.
  • `bin_name` - The name of the script path relative to the virtual

environment location. Used for `__VENV_BIN_NAME__ in activation scripts (see install_scripts`).

  • `env_exe` - The name of the Python interpreter in the virtual

environment. Used for `__VENV_PYTHON__ in activation scripts (see install_scripts`).

  • `env_exec_cmd` - The name of the Python interpreter, taking into

account filesystem redirections. This can be used to run Python in the virtual environment.

The *venv* sysconfig installation scheme <installation_paths> is used to construct the paths of the created directories.

The attribute `lib_path` was added to the context, and the context object was documented.

Creates the `pyvenv.cfg` configuration file in the environment.

Creates a copy or symlink to the Python executable in the environment. On POSIX systems, if a specific executable `python3.x was used, symlinks to python and python3` will be created pointing to that executable, unless files with those names already exist.

Installs activation scripts appropriate to the platform into the virtual environment.

Upgrades the core venv dependency packages (currently pip) in the environment. This is done by shelling out to the `pip` executable in the environment.

setuptools is no longer a core venv dependency.

A placeholder method which can be overridden in third party implementations to pre-install packages in the virtual environment or perform other post-creation steps.

This method can be called from setup_scripts or post_setup in subclasses to assist in installing custom scripts into the virtual environment.

*path* is the path to a directory that should contain subdirectories `common, posix, nt; each containing scripts destined for the bin directory in the environment. The contents of common and the directory corresponding to os.name` are copied after some text replacement of placeholders:

  • `__VENV_DIR__` is replaced with the absolute path of the environment

directory.

  • `__VENV_NAME__` is replaced with the environment name (final path

segment of environment directory).

  • `__VENV_PROMPT__` is replaced with the prompt (the environment

name surrounded by parentheses and with a following space)

  • `__VENV_BIN_NAME__` is replaced with the name of the bin directory

(either `bin or Scripts`).

  • `__VENV_PYTHON__` is replaced with the absolute path of the

environment's executable.

The directories are allowed to exist (for when an existing environment is being upgraded).

Creates a `.gitignore` file within the virtual environment that causes the entire directory to be ignored by the Git source control manager.

Windows now uses redirector scripts for `python[w].exe instead of copying the actual binaries. In 3.7.2 only setup_python` does nothing unless running from a build in the source tree.

Windows copies the redirector scripts as part of setup_python instead of setup_scripts. This was not the case in 3.7.2. When using symlinks, the original executables will be linked.

There is also a module-level convenience function:

symlinks=False, with_pip=False, prompt=None, \ upgrade_deps=False, *, scm_ignore_files=frozenset())

Create an EnvBuilder with the given keyword arguments, and call its ~EnvBuilder.create method with the *env_dir* argument.

Added the *with_pip* parameter

Added the *prompt* parameter

Added the *upgrade_deps* parameter

Added the *scm_ignore_files* parameter

An example of extending `EnvBuilder`

The following script shows how to extend EnvBuilder by implementing a subclass which installs setuptools and pip into a created virtual environment::

import os import os.path from subprocess import Popen, PIPE import sys from threading import Thread from urllib.parse import urlsplit from urllib.request import urlretrieve import venv

class ExtendedEnvBuilder(venv.EnvBuilder): """ This builder installs setuptools and pip so that you can pip or easy_install other packages into the created virtual environment.

:param nodist: If true, setuptools and pip are not installed into the created virtual environment. :param nopip: If true, pip is not installed into the created virtual environment. :param progress: If setuptools or pip are installed, the progress of the installation can be monitored by passing a progress callable. If specified, it is called with two arguments: a string indicating some progress, and a context indicating where the string is coming from. The context argument can have one of three values: 'main', indicating that it is called from virtualize() itself, and 'stdout' and 'stderr', which are obtained by reading lines from the output streams of a subprocess which is used to install the app.

If a callable is not specified, default progress information is output to sys.stderr. """

def __init__(self, *args, kwargs): self.nodist = kwargs.pop('nodist', False) self.nopip = kwargs.pop('nopip', False) self.progress = kwargs.pop('progress', None) self.verbose = kwargs.pop('verbose', False) super().__init__(*args, kwargs)

def post_setup(self, context): """ Set up any packages which need to be pre-installed into the virtual environment being created.

:param context: The information for the virtual environment creation request being processed. """ os.environ['VIRTUAL_ENV'] = context.env_dir if not self.nodist: self.install_setuptools(context) # Can't install pip without setuptools if not self.nopip and not self.nodist: self.install_pip(context)

def reader(self, stream, context): """ Read lines from a subprocess' output stream and either pass to a progress callable (if specified) or write progress information to sys.stderr. """ progress = self.progress while True: s = stream.readline() if not s: break if progress is not None: progress(s, context) else: if not self.verbose: sys.stderr.write('.') else: sys.stderr.write(s.decode('utf-8')) sys.stderr.flush() stream.close()

def install_script(self, context, name, url): _, _, path, _, _ = urlsplit(url) fn = os.path.split(path)[-1] binpath = context.bin_path distpath = os.path.join(binpath, fn) # Download script into the virtual environment's binaries folder urlretrieve(url, distpath) progress = self.progress if self.verbose: term = '\n' else: term = '' if progress is not None: progress('Installing %s ...%s' % (name, term), 'main') else: sys.stderr.write('Installing %s ...%s' % (name, term)) sys.stderr.flush() # Install in the virtual environment args = [context.env_exe, fn] p = Popen(args, stdout=PIPE, stderr=PIPE, cwd=binpath) t1 = Thread(target=self.reader, args=(p.stdout, 'stdout')) t1.start() t2 = Thread(target=self.reader, args=(p.stderr, 'stderr')) t2.start() p.wait() t1.join() t2.join() if progress is not None: progress('done.', 'main') else: sys.stderr.write('done.\n') # Clean up - no longer needed os.unlink(distpath)

def install_setuptools(self, context): """ Install setuptools in the virtual environment.

:param context: The information for the virtual environment creation request being processed. """ url = "https://bootstrap.pypa.io/ez_setup.py" self.install_script(context, 'setuptools', url) # clear up the setuptools archive which gets downloaded pred = lambda o: o.startswith('setuptools-') and o.endswith('.tar.gz') files = filter(pred, os.listdir(context.bin_path)) for f in files: f = os.path.join(context.bin_path, f) os.unlink(f)

def install_pip(self, context): """ Install pip in the virtual environment.

:param context: The information for the virtual environment creation request being processed. """ url = 'https://bootstrap.pypa.io/get-pip.py' self.install_script(context, 'pip', url)

def main(args=None): import argparse

parser = argparse.ArgumentParser(prog=__name__, description='Creates virtual Python ' 'environments in one or ' 'more target ' 'directories.') parser.add_argument('dirs', metavar='ENV_DIR', nargs='+', help='A directory in which to create the ' 'virtual environment.') parser.add_argument('--no-setuptools', default=False, action='store_true', dest='nodist', help="Don't install setuptools or pip in the " "virtual environment.") parser.add_argument('--no-pip', default=False, action='store_true', dest='nopip', help="Don't install pip in the virtual " "environment.") parser.add_argument('--system-site-packages', default=False, action='store_true', dest='system_site', help='Give the virtual environment access to the ' 'system site-packages dir.') if os.name == 'nt': use_symlinks = False else: use_symlinks = True parser.add_argument('--symlinks', default=use_symlinks, action='store_true', dest='symlinks', help='Try to use symlinks rather than copies, ' 'when symlinks are not the default for ' 'the platform.') parser.add_argument('--clear', default=False, action='store_true', dest='clear', help='Delete the contents of the ' 'virtual environment ' 'directory if it already ' 'exists, before virtual ' 'environment creation.') parser.add_argument('--upgrade', default=False, action='store_true', dest='upgrade', help='Upgrade the virtual ' 'environment directory to ' 'use this version of ' 'Python, assuming Python ' 'has been upgraded ' 'in-place.') parser.add_argument('--verbose', default=False, action='store_true', dest='verbose', help='Display the output ' 'from the scripts which ' 'install setuptools and pip.') options = parser.parse_args(args) if options.upgrade and options.clear: raise ValueError('you cannot supply --upgrade and --clear together.') builder = ExtendedEnvBuilder(system_site_packages=options.system_site, clear=options.clear, symlinks=options.symlinks, upgrade=options.upgrade, nodist=options.nodist, nopip=options.nopip, verbose=options.verbose) for d in options.dirs: builder.create(d)

if __name__ == '__main__': rc = 1 try: main() rc = 0 except Exception as e: print('Error: %s' % e, file=sys.stderr) sys.exit(rc)

This script is also available for download online <https://gist.github.com/vsajip/4673395>_.