:mod:`!statistics` --- Mathematical statistics functions

فهرست فصل‌ها دانلود آرشیوناشر

Python 3.14 Docs · نسخهٔ 3.14.10 · PSF License

:mod:!statistics --- Mathematical statistics functions

:synopsis: Mathematical statistics functions

Source code: Lib/statistics.py

from statistics import * import math __name__ = '<doctest>'

--------------

This module provides functions for calculating mathematical statistics of numeric (~numbers.Real-valued) data.

The module is not intended to be a competitor to third-party libraries such as NumPy <https://numpy.org>_, SciPy <https://scipy.org/>_, or proprietary full-featured statistics packages aimed at professional statisticians such as Minitab, SAS and Matlab. It is aimed at the level of graphing and scientific calculators.

Unless explicitly noted, these functions support int, float, ~decimal.Decimal and ~fractions.Fraction. Behaviour with other types (whether in the numeric tower or not) is currently unsupported. Collections with a mix of types are also undefined and implementation-dependent. If your input data consists of mixed types, you may be able to use map to ensure a consistent result, for example: `map(float, input_data)`.

Some datasets use `NaN (not a number) values to represent missing data. Since NaNs have unusual comparison semantics, they cause surprising or undefined behaviors in the statistics functions that sort data or that count occurrences. The functions affected are median(), median_low(), median_high(), median_grouped(), mode(), multimode(), and quantiles(). The NaN` values should be stripped before calling these functions::

توجه: >> from statistics import median >> from math import isnan >> from itertools import filterfalse

توجه: >> data = [20.7, float('NaN'),19.2, 18.3, float('NaN'), 14.4] >> sorted(data) # This has surprising behavior

[20.7, nan, 14.4, 18.3, 19.2, nan]

توجه: >> median(data) # This result is unexpected

16.35

توجه: >> sum(map(isnan, data)) # Number of missing values

2

توجه: >> clean = list(filterfalse(isnan, data)) # Strip NaN values >> clean

[20.7, 19.2, 18.3, 14.4]

توجه: >> sorted(clean) # Sorting now works as expected

[14.4, 18.3, 19.2, 20.7]

توجه: >> median(clean) # This result is now well defined

18.75

Averages and measures of central location

These functions calculate an average or typical value from a population or sample.

======================= =============================================================== mean Arithmetic mean ("average") of data. fmean Fast, floating-point arithmetic mean, with optional weighting. geometric_mean Geometric mean of data. harmonic_mean Harmonic mean of data. kde Estimate the probability density distribution of the data. kde_random Random sampling from the PDF generated by kde(). median Median (middle value) of data. median_low Low median of data. median_high High median of data. median_grouped Median (50th percentile) of grouped data. mode Single mode (most common value) of discrete or nominal data. multimode List of modes (most common values) of discrete or nominal data. quantiles Divide data into intervals with equal probability. ======================= ===============================================================

Measures of spread

These functions calculate a measure of how much the population or sample tends to deviate from the typical or average values.

======================= ============================================= pstdev Population standard deviation of data. pvariance Population variance of data. stdev Sample standard deviation of data. variance Sample variance of data. ======================= =============================================

Statistics for relations between two inputs

These functions calculate statistics regarding relations between two inputs.

========================= ===================================================== covariance Sample covariance for two variables. correlation Pearson and Spearman's correlation coefficients. linear_regression Slope and intercept for simple linear regression. ========================= =====================================================

Function details

Note: The functions do not require the data given to them to be sorted. However, for reading convenience, most of the examples show sorted sequences.

Return the sample arithmetic mean of *data* which can be a sequence or iterable.

The arithmetic mean is the sum of the data divided by the number of data points. It is commonly called "the average", although it is only one of many different mathematical averages. It is a measure of the central location of the data.

If *data* is empty, StatisticsError will be raised.

Some examples of use:

توجه: >> mean([1, 2, 3, 4, 4])

2.8

توجه: >> mean([-1.0, 2.5, 3.25, 5.75])

2.625

توجه: >> from fractions import Fraction as F >> mean([F(3, 7), F(1, 21), F(5, 3), F(1, 3)])

Fraction(13, 21)

توجه: >> from decimal import Decimal as D >> mean([D("0.5"), D("0.75"), D("0.625"), D("0.375")])

Decimal('0.5625')

The mean is strongly affected by outliers <https://en.wikipedia.org/wiki/Outlier>_ and is not necessarily a typical example of the data points. For a more robust, although less efficient, measure of central tendency <https://en.wikipedia.org/wiki/Central_tendency>_, see median.

The sample mean gives an unbiased estimate of the true population mean, so that when taken on average over all the possible samples, `mean(sample) converges on the true mean of the entire population. If *data* represents the entire population rather than a sample, then mean(data)` is equivalent to calculating the true population mean μ.

Convert *data* to floats and compute the arithmetic mean.

This runs faster than the mean function and it always returns a float. The *data* may be a sequence or iterable. If the input dataset is empty, raises a StatisticsError.

توجه: >> fmean([3.5, 4.0, 5.25])

4.25

Optional weighting is supported. For example, a professor assigns a grade for a course by weighting quizzes at 20%, homework at 20%, a midterm exam at 30%, and a final exam at 30%:

توجه: >> grades = [85, 92, 83, 91] >> weights = [0.20, 0.20, 0.30, 0.30] >> fmean(grades, weights)

87.6

If *weights* is supplied, it must be the same length as the *data* or a ValueError will be raised.

Added support for *weights*.

Convert *data* to floats and compute the geometric mean.

The geometric mean indicates the central tendency or typical value of the *data* using the product of the values (as opposed to the arithmetic mean which uses their sum).

Raises a StatisticsError if the input dataset is empty, if it contains a zero, or if it contains a negative value. The *data* may be a sequence or iterable.

No special efforts are made to achieve exact results. (However, this may change in the future.)

توجه: >> round(geometric_mean([54, 24, 36]), 1)

36.0

Return the harmonic mean of *data*, a sequence or iterable of real-valued numbers. If *weights* is omitted or `None`, then equal weighting is assumed.

The harmonic mean is the reciprocal of the arithmetic mean of the reciprocals of the data. For example, the harmonic mean of three values *a*, *b* and *c* will be equivalent to `3/(1/a + 1/b + 1/c)`. If one of the values is zero, the result will be zero.

The harmonic mean is a type of average, a measure of the central location of the data. It is often appropriate when averaging ratios or rates, for example speeds.

Suppose a car travels 10 km at 40 km/hr, then another 10 km at 60 km/hr. What is the average speed?

توجه: >> harmonic_mean([40, 60])

48.0

Suppose a car travels 40 km/hr for 5 km, and when traffic clears, speeds-up to 60 km/hr for the remaining 30 km of the journey. What is the average speed?

توجه: >> harmonic_mean([40, 60], weights=[5, 30])

56.0

StatisticsError is raised if *data* is empty, any element is less than zero, or if the weighted sum isn't positive.

The current algorithm has an early-out when it encounters a zero in the input. This means that the subsequent inputs are not tested for validity. (This behavior may change in the future.)

Added support for *weights*.

Kernel Density Estimation (KDE) <https://www.itm-conferences.org/articles/itmconf/pdf/2018/08/itmconf_sam2018_00037.pdf>_: Create a continuous probability density function or cumulative distribution function from discrete samples.

The basic idea is to smooth the data using a kernel function <https://en.wikipedia.org/wiki/Kernel_(statistics)>_. to help draw inferences about a population from a sample.

The degree of smoothing is controlled by the scaling parameter *h* which is called the bandwidth. Smaller values emphasize local features while larger values give smoother results.

The *kernel* determines the relative weights of the sample data points. Generally, the choice of kernel shape does not matter as much as the more influential bandwidth smoothing parameter.

Kernels that give some weight to every sample point include *normal* (*gauss*), *logistic*, and *sigmoid*.

Kernels that only give weight to sample points within the bandwidth include *rectangular* (*uniform*), *triangular*, *parabolic* (*epanechnikov*), *quartic* (*biweight*), *triweight*, and *cosine*.

If *cumulative* is true, will return a cumulative distribution function.

A StatisticsError will be raised if the *data* sequence is empty.

Wikipedia has an example <https://en.wikipedia.org/wiki/Kernel_density_estimation#Example>_ where we can use kde to generate and plot a probability density function estimated from a small sample:

توجه: >> sample = [-2.1, -1.3, -0.4, 1.9, 5.1, 6.2] >> f_hat = kde(sample, h=1.5) >> xarr = [i/100 for i in range(-750, 1100)] >> yarr = [f_hat(x) for x in xarr]

The points in `xarr and yarr` can be used to make a PDF plot:

:alt: Scatter plot of the estimated probability density function.

Because the returned `f_hat` function is typically called many times, it caches the *data* for performance. To support dynamic datasets, this cache automatically refreshes whenever the length of the *data* changes. This allows new samples to be added as they become available.

Return a function that makes a random selection from the estimated probability density function produced by `kde(data, h, kernel)`.

Providing a *seed* allows reproducible selections. In the future, the values may change slightly as more accurate kernel inverse CDF estimates are implemented. The seed may be an integer, float, str, or bytes.

A StatisticsError will be raised if the *data* sequence is empty.

Continuing the example for kde, we can use kde_random to generate new random selections from an estimated probability density function:

توجه: >> data = [-2.1, -1.3, -0.4, 1.9, 5.1, 6.2] >> rand = kde_random(data, h=1.5, seed=8675309) >> new_selections = [rand() for i in range(10)] >> [round(x, 1) for x in new_selections]

[0.7, 6.2, 1.2, 6.9, 7.0, 1.8, 2.5, -0.5, -1.8, 5.6]

Return the median (middle value) of numeric data, using the common "mean of middle two" method. If *data* is empty, StatisticsError is raised. *data* can be a sequence or iterable.

The median is a robust measure of central location and is less affected by the presence of outliers. When the number of data points is odd, the middle data point is returned:

توجه: >> median([1, 3, 5])

3

When the number of data points is even, the median is interpolated by taking the average of the two middle values:

توجه: >> median([1, 3, 5, 7])

4.0

This is suited for when your data is discrete, and you don't mind that the median may not be an actual data point.

If the data is ordinal (supports order operations) but not numeric (doesn't support addition), consider using median_low or median_high instead.

Return the low median of numeric data. If *data* is empty, StatisticsError is raised. *data* can be a sequence or iterable.

The low median is always a member of the data set. When the number of data points is odd, the middle value is returned. When it is even, the smaller of the two middle values is returned.

توجه: >> median_low([1, 3, 5])

3

توجه: >> median_low([1, 3, 5, 7])

3

Use the low median when your data are discrete and you prefer the median to be an actual data point rather than interpolated.

Return the high median of data. If *data* is empty, StatisticsError is raised. *data* can be a sequence or iterable.

The high median is always a member of the data set. When the number of data points is odd, the middle value is returned. When it is even, the larger of the two middle values is returned.

توجه: >> median_high([1, 3, 5])

3

توجه: >> median_high([1, 3, 5, 7])

5

Use the high median when your data are discrete and you prefer the median to be an actual data point rather than interpolated.

Estimates the median for numeric data that has been grouped or binned <https://en.wikipedia.org/wiki/Data_binning>_ around the midpoints of consecutive, fixed-width intervals.

The *data* can be any iterable of numeric data with each value being exactly the midpoint of a bin. At least one value must be present.

The *interval* is the width of each bin.

For example, demographic information may have been summarized into consecutive ten-year age groups with each group being represented by the 5-year midpoints of the intervals:

توجه: >> from collections import Counter >> demographics = Counter({

... 25: 172, # 20 to 30 years old ... 35: 484, # 30 to 40 years old ... 45: 387, # 40 to 50 years old ... 55: 22, # 50 to 60 years old ... 65: 6, # 60 to 70 years old ... }) ...

The 50th percentile (median) is the 536th person out of the 1071 member cohort. That person is in the 30 to 40 year old age group.

The regular median function would assume that everyone in the tricenarian age group was exactly 35 years old. A more tenable assumption is that the 484 members of that age group are evenly distributed between 30 and 40. For that, we use median_grouped:

توجه: >> data = list(demographics.elements()) >> median(data)

35

توجه: >> round(median_grouped(data, interval=10), 1)

37.5

The caller is responsible for making sure the data points are separated by exact multiples of *interval*. This is essential for getting a correct result. The function does not check this precondition.

Inputs may be any numeric type that can be coerced to a float during the interpolation step.

Return the single most common data point from discrete or nominal *data*. The mode (when it exists) is the most typical value and serves as a measure of central location.

If there are multiple modes with the same frequency, returns the first one encountered in the *data*. If the smallest or largest of those is desired instead, use `min(multimode(data)) or max(multimode(data)). If the input *data* is empty, StatisticsError` is raised.

`mode` assumes discrete data and returns a single value. This is the standard treatment of the mode as commonly taught in schools:

توجه: >> mode([1, 1, 2, 3, 3, 3, 3, 4])

3

The mode is unique in that it is the only statistic in this package that also applies to nominal (non-numeric) data:

توجه: >> mode(["red", "blue", "blue", "red", "green", "red", "red"])

'red'

Only hashable inputs are supported. To handle type set, consider casting to frozenset. To handle type list, consider casting to tuple. For mixed or nested inputs, consider using this slower quadratic algorithm that only depends on equality tests: `max(data, key=data.count)`.

Now handles multimodal datasets by returning the first mode encountered. Formerly, it raised StatisticsError when more than one mode was found.

Return a list of the most frequently occurring values in the order they were first encountered in the *data*. Will return more than one result if there are multiple modes or an empty list if the *data* is empty:

توجه: >> multimode('aabbbbccddddeeffffgg')

['b', 'd', 'f']

توجه: >> multimode('')

[]

Return the population standard deviation (the square root of the population variance). See pvariance for arguments and other details.

توجه: >> pstdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75])

0.986893273527251

Return the population variance of *data*, a non-empty sequence or iterable of real-valued numbers. Variance, or second moment about the mean, is a measure of the variability (spread or dispersion) of data. A large variance indicates that the data is spread out; a small variance indicates it is clustered closely around the mean.

If the optional second argument *mu* is given, it should be the *population* mean of the *data*. It can also be used to compute the second moment around a point that is not the mean. If it is missing or `None` (the default), the arithmetic mean is automatically calculated.

Use this function to calculate the variance from the entire population. To estimate the variance from a sample, the variance function is usually a better choice.

Raises StatisticsError if *data* is empty.

Examples:

توجه: >> data = [0.0, 0.25, 0.25, 1.25, 1.5, 1.75, 2.75, 3.25] >> pvariance(data)

1.25

If you have already calculated the mean of your data, you can pass it as the optional second argument *mu* to avoid recalculation:

توجه: >> mu = mean(data) >> pvariance(data, mu)

1.25

Decimals and Fractions are supported:

توجه: >> from decimal import Decimal as D >> pvariance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")])

Decimal('24.815')

توجه: >> from fractions import Fraction as F >> pvariance([F(1, 4), F(5, 4), F(1, 2)])

Fraction(13, 72)

When called with the entire population, this gives the population variance σ². When called on a sample instead, this is the biased sample variance s², also known as variance with N degrees of freedom.

If you somehow know the true population mean μ, you may use this function to calculate the variance of a sample, giving the known population mean as the second argument. Provided the data points are a random sample of the population, the result will be an unbiased estimate of the population variance.

Return the sample standard deviation (the square root of the sample variance). See variance for arguments and other details.

توجه: >> stdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75])

1.0810874155219827

Return the sample variance of *data*, an iterable of at least two real-valued numbers. Variance, or second moment about the mean, is a measure of the variability (spread or dispersion) of data. A large variance indicates that the data is spread out; a small variance indicates it is clustered closely around the mean.

If the optional second argument *xbar* is given, it should be the *sample* mean of *data*. If it is missing or `None` (the default), the mean is automatically calculated.

Use this function when your data is a sample from a population. To calculate the variance from the entire population, see pvariance.

Raises StatisticsError if *data* has fewer than two values.

Examples:

توجه: >> data = [2.75, 1.75, 1.25, 0.25, 0.5, 1.25, 3.5] >> variance(data)

1.3720238095238095

If you have already calculated the sample mean of your data, you can pass it as the optional second argument *xbar* to avoid recalculation:

توجه: >> m = mean(data) >> variance(data, m)

1.3720238095238095

This function does not attempt to verify that you have passed the actual mean as *xbar*. Using arbitrary values for *xbar* can lead to invalid or impossible results.

Decimal and Fraction values are supported:

توجه: >> from decimal import Decimal as D >> variance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")])

Decimal('31.01875')

توجه: >> from fractions import Fraction as F >> variance([F(1, 6), F(1, 2), F(5, 3)])

Fraction(67, 108)

This is the sample variance s² with Bessel's correction, also known as variance with N-1 degrees of freedom. Provided that the data points are representative (e.g. independent and identically distributed), the result should be an unbiased estimate of the true population variance.

If you somehow know the actual population mean μ you should pass it to the pvariance function as the *mu* parameter to get the variance of a sample.

Divide *data* into *n* continuous intervals with equal probability. Returns a list of `n - 1` cut points separating the intervals.

Set *n* to 4 for quartiles (the default). Set *n* to 10 for deciles. Set *n* to 100 for percentiles which gives the 99 cuts points that separate *data* into 100 equal sized groups. Raises StatisticsError if *n* is not least 1.

The *data* can be any iterable containing sample data. For meaningful results, the number of data points in *data* should be larger than *n*. Raises StatisticsError if there is not at least one data point.

The cut points are linearly interpolated from the two nearest data points. For example, if a cut point falls one-third of the distance between two sample values, `100 and 112, the cut-point will evaluate to 104`.

The *method* for computing quantiles can be varied depending on whether the *data* includes or excludes the lowest and highest possible values from the population.

The default *method* is "exclusive" and is used for data sampled from a population that can have more extreme values than found in the samples. The portion of the population falling below the *i-th* of *m* sorted data points is computed as `i / (m + 1)`. Given nine sample values, the method sorts them and assigns the following percentiles: 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%.

Setting the *method* to "inclusive" is used for describing population data or for samples that are known to include the most extreme values from the population. The minimum value in *data* is treated as the 0th percentile and the maximum value is treated as the 100th percentile. The portion of the population falling below the *i-th* of *m* sorted data points is computed as `(i - 1) / (m - 1)`. Given 11 sample values, the method sorts them and assigns the following percentiles: 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%.

# Decile cut points for empirically sampled data

توجه: >> data = [105, 129, 87, 86, 111, 111, 89, 81, 108, 92, 110,

... 100, 75, 105, 103, 109, 76, 119, 99, 91, 103, 129, ... 106, 101, 84, 111, 74, 87, 86, 103, 103, 106, 86, ... 111, 75, 87, 102, 121, 111, 88, 89, 101, 106, 95, ... 103, 107, 101, 81, 109, 104]

توجه: >> [round(q, 1) for q in quantiles(data, n=10)]

[81.0, 86.2, 89.0, 99.4, 102.5, 103.6, 106.0, 109.8, 111.0]

No longer raises an exception for an input with only a single data point. This allows quantile estimates to be built up one sample point at a time becoming gradually more refined with each new data point.

Return the sample covariance of two inputs *x* and *y*. Covariance is a measure of the joint variability of two inputs.

Both inputs must be of the same length (no less than two), otherwise StatisticsError is raised.

Examples:

توجه: >> x = [1, 2, 3, 4, 5, 6, 7, 8, 9] >> y = [1, 2, 3, 1, 2, 3, 1, 2, 3] >> covariance(x, y)

0.75

توجه: >> z = [9, 8, 7, 6, 5, 4, 3, 2, 1] >> covariance(x, z)

-7.5

توجه: >> covariance(z, x)

-7.5

Return the Pearson's correlation coefficient <https://en.wikipedia.org/wiki/Pearson_correlation_coefficient>_ for two inputs. Pearson's correlation coefficient *r* takes values between -1 and +1. It measures the strength and direction of a linear relationship.

If *method* is "ranked", computes Spearman's rank correlation coefficient <https://en.wikipedia.org/wiki/Spearman%27s_rank_correlation_coefficient>_ for two inputs. The data is replaced by ranks. Ties are averaged so that equal values receive the same rank. The resulting coefficient measures the strength of a monotonic relationship.

Spearman's correlation coefficient is appropriate for ordinal data or for continuous data that doesn't meet the linear proportion requirement for Pearson's correlation coefficient.

Both inputs must be of the same length (no less than two), and need not to be constant, otherwise StatisticsError is raised.

Example with Kepler's laws of planetary motion <https://en.wikipedia.org/wiki/Kepler's_laws_of_planetary_motion>_:

توجه: >> # Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune >> orbital_period = [88, 225, 365, 687, 4331, 10_756, 30_687, 60_190] # days >> dist_from_sun = [58, 108, 150, 228, 778, 1_400, 2_900, 4_500] # million km

توجه: >> # Show that a perfect monotonic relationship exists >> correlation(orbital_period, dist_from_sun, method='ranked')

1.0

توجه: >> # Observe that a linear relationship is imperfect >> round(correlation(orbital_period, dist_from_sun), 4)

0.9882

توجه: >> # Demonstrate Kepler's third law: There is a linear correlation >> # between the square of the orbital period and the cube of the >> # distance from the sun. >> period_squared = [p * p for p in orbital_period] >> dist_cubed = [d * d * d for d in dist_from_sun] >> round(correlation(period_squared, dist_cubed), 4)

1.0

Added support for Spearman's rank correlation coefficient.

Return the slope and intercept of simple linear regression <https://en.wikipedia.org/wiki/Simple_linear_regression>_ parameters estimated using ordinary least squares. Simple linear regression describes the relationship between an independent variable *x* and a dependent variable *y* in terms of this linear function:

*y = slope \* x + intercept + noise*

where `slope and intercept are the regression parameters that are estimated, and noise` represents the variability of the data that was not explained by the linear regression (it is equal to the difference between predicted and actual values of the dependent variable).

Both inputs must be of the same length (no less than two), and the independent variable *x* cannot be constant; otherwise a StatisticsError is raised.

For example, we can use the release dates of the Monty Python films <https://en.wikipedia.org/wiki/Monty_Python#Films>_ to predict the cumulative number of Monty Python films that would have been produced by 2019 assuming that they had kept the pace.

توجه: >> year = [1971, 1975, 1979, 1982, 1983] >> films_total = [1, 2, 3, 4, 5] >> slope, intercept = linear_regression(year, films_total) >> round(slope * 2019 + intercept)

16

If *proportional* is true, the independent variable *x* and the dependent variable *y* are assumed to be directly proportional. The data is fit to a line passing through the origin. Since the *intercept* will always be 0.0, the underlying linear function simplifies to:

*y = slope \* x + noise*

Continuing the example from correlation, we look to see how well a model based on major planets can predict the orbital distances for dwarf planets:

توجه: >> model = linear_regression(period_squared, dist_cubed, proportional=True) >> slope = model.slope

توجه: >> # Dwarf planets: Pluto, Eris, Makemake, Haumea, Ceres >> orbital_periods = [90_560, 204_199, 111_845, 103_410, 1_680] # days >> predicted_dist = [math.cbrt(slope * (p * p)) for p in orbital_periods] >> list(map(round, predicted_dist))

[5912, 10166, 6806, 6459, 414]

توجه: >> [5_906, 10_152, 6_796, 6_450, 414] # actual distance in million km

[5906, 10152, 6796, 6450, 414]

Added support for *proportional*.

Exceptions

A single exception is defined:

Subclass of ValueError for statistics-related exceptions.

:class:NormalDist objects

NormalDist is a tool for creating and manipulating normal distributions of a random variable <http://www.stat.yale.edu/Courses/1997-98/101/ranvar.htm>_. It is a class that treats the mean and standard deviation of data measurements as a single entity.

Normal distributions arise from the Central Limit Theorem <https://en.wikipedia.org/wiki/Central_limit_theorem>_ and have a wide range of applications in statistics.

Returns a new *NormalDist* object where *mu* represents the arithmetic mean <https://en.wikipedia.org/wiki/Arithmetic_mean>_ and *sigma* represents the standard deviation <https://en.wikipedia.org/wiki/Standard_deviation>_.

If *sigma* is negative, raises StatisticsError.

A read-only property for the arithmetic mean <https://en.wikipedia.org/wiki/Arithmetic_mean>_ of a normal distribution.

A read-only property for the median <https://en.wikipedia.org/wiki/Median>_ of a normal distribution.

A read-only property for the mode <https://en.wikipedia.org/wiki/Mode_(statistics)>_ of a normal distribution.

A read-only property for the standard deviation <https://en.wikipedia.org/wiki/Standard_deviation>_ of a normal distribution.

A read-only property for the variance <https://en.wikipedia.org/wiki/Variance>_ of a normal distribution. Equal to the square of the standard deviation.

Makes a normal distribution instance with *mu* and *sigma* parameters estimated from the *data* using fmean and stdev.

The *data* can be any iterable and should consist of values that can be converted to type float. If *data* does not contain at least two elements, raises StatisticsError because it takes at least one point to estimate a central value and at least two points to estimate dispersion.

Generates *n* random samples for a given mean and standard deviation. Returns a list of float values.

If *seed* is given, creates a new instance of the underlying random number generator. This is useful for creating reproducible results, even in a multi-threading context.

Switched to a faster algorithm. To reproduce samples from previous versions, use random.seed and random.gauss.

Using a probability density function (pdf) <https://en.wikipedia.org/wiki/Probability_density_function>_, compute the relative likelihood that a random variable *X* will be near the given value *x*. Mathematically, it is the limit of the ratio `P(x <= X < x+dx) / dx` as *dx* approaches zero.

The relative likelihood is computed as the probability of a sample occurring in a narrow range divided by the width of the range (hence the word "density"). Since the likelihood is relative to other points, its value can be greater than `1.0`.

Using a cumulative distribution function (cdf) <https://en.wikipedia.org/wiki/Cumulative_distribution_function>_, compute the probability that a random variable *X* will be less than or equal to *x*. Mathematically, it is written `P(X <= x)`.

Compute the inverse cumulative distribution function, also known as the quantile function <https://en.wikipedia.org/wiki/Quantile_function>_ or the percent-point <https://web.archive.org/web/20190203145224/https://www.statisticshowto.datasciencecentral.com/inverse-distribution-function/>_ function. Mathematically, it is written `x : P(X <= x) = p`.

Finds the value *x* of the random variable *X* such that the probability of the variable being less than or equal to that value equals the given probability *p*.

Measures the agreement between two normal probability distributions. Returns a value between 0.0 and 1.0 giving the overlapping area for the two probability density functions <https://www.rasch.org/rmt/rmt101r.htm>_.

Divide the normal distribution into *n* continuous intervals with equal probability. Returns a list of (n - 1) cut points separating the intervals.

Set *n* to 4 for quartiles (the default). Set *n* to 10 for deciles. Set *n* to 100 for percentiles which gives the 99 cuts points that separate the normal distribution into 100 equal sized groups.

Compute the Standard Score <https://www.statisticshowto.com/probability-and-statistics/z-score/>_ describing *x* in terms of the number of standard deviations above or below the mean of the normal distribution: `(x - mean) / stdev`.

Instances of NormalDist support addition, subtraction, multiplication and division by a constant. These operations are used for translation and scaling. For example:

توجه: >> temperature_february = NormalDist(5, 2.5) # Celsius >> temperature_february * (9/5) + 32 # Fahrenheit

NormalDist(mu=41.0, sigma=4.5)

Dividing a constant by an instance of NormalDist is not supported because the result wouldn't be normally distributed.

Since normal distributions arise from additive effects of independent variables, it is possible to add and subtract two independent normally distributed random variables <https://en.wikipedia.org/wiki/Sum_of_normally_distributed_random_variables>_ represented as instances of NormalDist. For example:

توجه: >> birth_weights = NormalDist.from_samples([2.5, 3.1, 2.1, 2.4, 2.7, 3.5]) >> drug_effects = NormalDist(0.4, 0.15) >> combined = birth_weights + drug_effects >> round(combined.mean, 1)

3.1

توجه: >> round(combined.stdev, 1)

0.5

Examples and Recipes

Classic probability problems ********

NormalDist readily solves classic probability problems.

For example, given historical data for SAT exams <https://nces.ed.gov/programs/digest/d17/tables/dt17_226.40.asp>_ showing that scores are normally distributed with a mean of 1060 and a standard deviation of 195, determine the percentage of students with test scores between 1100 and 1200, after rounding to the nearest whole number:

توجه: >> sat = NormalDist(1060, 195) >> fraction = sat.cdf(1200 + 0.5) - sat.cdf(1100 - 0.5) >> round(fraction * 100.0, 1)

18.4

Find the quartiles <https://en.wikipedia.org/wiki/Quartile>_ and deciles <https://en.wikipedia.org/wiki/Decile>_ for the SAT scores:

توجه: >> list(map(round, sat.quantiles()))

[928, 1060, 1192]

توجه: >> list(map(round, sat.quantiles(n=10)))

[810, 896, 958, 1011, 1060, 1109, 1162, 1224, 1310]

Monte Carlo inputs for simulations **********

To estimate the distribution for a model that isn't easy to solve analytically, NormalDist can generate input samples for a Monte Carlo simulation <https://en.wikipedia.org/wiki/Monte_Carlo_method>_:

توجه: >> def model(x, y, z):

... return (3*x + 7*x*y - 5*y) / (11 * z) ...

توجه: >> n = 100_000 >> X = NormalDist(10, 2.5).samples(n, seed=3652260728) >> Y = NormalDist(15, 1.75).samples(n, seed=4582495471) >> Z = NormalDist(50, 1.25).samples(n, seed=6582483453) >> quantiles(map(model, X, Y, Z)) # doctest: +SKIP

[1.4591308524824727, 1.8035946855390597, 2.175091447274739]

Approximating binomial distributions ********

Normal distributions can be used to approximate Binomial distributions <https://mathworld.wolfram.com/BinomialDistribution.html>_ when the sample size is large and when the probability of a successful trial is near 50%.

For example, an open source conference has 750 attendees and two rooms with a 500 person capacity. There is a talk about Python and another about Ruby. In previous conferences, 65% of the attendees preferred to listen to Python talks. Assuming the population preferences haven't changed, what is the probability that the Python room will stay within its capacity limits?

توجه: >> n = 750 # Sample size >> p = 0.65 # Preference for Python >> q = 1.0 - p # Preference for Ruby >> k = 500 # Room capacity

توجه: >> # Approximation using the cumulative normal distribution >> from math import sqrt >> round(NormalDist(mu=n*p, sigma=sqrt(n*p*q)).cdf(k + 0.5), 4)

0.8402

توجه: >> # Exact solution using the cumulative binomial distribution >> from math import comb, fsum >> round(fsum(comb(n, r) * pr * q(n-r) for r in range(k+1)), 4)

0.8402

توجه: >> # Approximation using a simulation >> from random import seed, binomialvariate >> seed(8675309) >> mean(binomialvariate(n, p) <= k for i in range(10_000))

0.8406

Naive bayesian classifier *****

Normal distributions commonly arise in machine learning problems.

Wikipedia has a nice example of a Naive Bayesian Classifier <https://en.wikipedia.org/wiki/Naive_Bayes_classifier#Person_classification>_. The challenge is to predict a person's gender from measurements of normally distributed features including height, weight, and foot size.

We're given a training dataset with measurements for eight people. The measurements are assumed to be normally distributed, so we summarize the data with NormalDist:

توجه: >> height_male = NormalDist.from_samples([6, 5.92, 5.58, 5.92]) >> height_female = NormalDist.from_samples([5, 5.5, 5.42, 5.75]) >> weight_male = NormalDist.from_samples([180, 190, 170, 165]) >> weight_female = NormalDist.from_samples([100, 150, 130, 150]) >> foot_size_male = NormalDist.from_samples([12, 11, 12, 10]) >> foot_size_female = NormalDist.from_samples([6, 8, 7, 9])

Next, we encounter a new person whose feature measurements are known but whose gender is unknown:

توجه: >> ht = 6.0 # height >> wt = 130 # weight >> fs = 8 # foot size

Starting with a 50% prior probability <https://en.wikipedia.org/wiki/Prior_probability>_ of being male or female, we compute the posterior as the prior times the product of likelihoods for the feature measurements given the gender:

توجه: >> prior_male = 0.5 >> prior_female = 0.5 >> posterior_male = (prior_male * height_male.pdf(ht) *

... weight_male.pdf(wt) * foot_size_male.pdf(fs))

توجه: >> posterior_female = (prior_female * height_female.pdf(ht) *

... weight_female.pdf(wt) * foot_size_female.pdf(fs))

The final prediction goes to the largest posterior. This is known as the maximum a posteriori <https://en.wikipedia.org/wiki/Maximum_a_posteriori_estimation>_ or MAP:

توجه: >> 'male' if posterior_male > posterior_female else 'female'

'female'

.. # This modelines must appear within the last ten lines of the file. kate: indent-width 3; remove-trailing-space on; replace-tabs on; encoding utf-8;