:mod:`!ipaddress` --- IPv4/IPv6 manipulation library

فهرست فصل‌ها دانلود آرشیوناشر

Python 3.14 Docs · نسخهٔ 3.14.10 · PSF License

:mod:!ipaddress --- IPv4/IPv6 manipulation library

:synopsis: IPv4/IPv6 manipulation library.

Source code: Lib/ipaddress.py

--------------

!ipaddress provides the capabilities to create, manipulate and operate on IPv4 and IPv6 addresses and networks.

The functions and classes in this module make it straightforward to handle various tasks related to IP addresses, including checking whether or not two hosts are on the same subnet, iterating over all hosts in a particular subnet, checking whether or not a string represents a valid IP address or network definition, and so on.

This is the full module API reference—for an overview and introduction, see ipaddress-howto.

import ipaddress from ipaddress import ( ip_network, IPv4Address, IPv4Interface, IPv4Network, )

Convenience factory functions

The !ipaddress module provides factory functions to conveniently create IP addresses, networks and interfaces:

Return an IPv4Address or IPv6Address object depending on the IP address passed as argument. Either IPv4 or IPv6 addresses may be supplied; integers less than `2**32 will be considered to be IPv4 by default. A ValueError` is raised if *address* does not represent a valid IPv4 or IPv6 address.

توجه: >> ipaddress.ip_address('192.168.0.1')

IPv4Address('192.168.0.1')

توجه: >> ipaddress.ip_address('2001:db8::')

IPv6Address('2001:db8::')

Return an IPv4Network or IPv6Network object depending on the IP address passed as argument. *address* is a string or integer representing the IP network. Either IPv4 or IPv6 networks may be supplied; integers less than `2**32 will be considered to be IPv4 by default. *strict* is passed to IPv4Network or IPv6Network constructor. A ValueError` is raised if *address* does not represent a valid IPv4 or IPv6 address, or if the network has host bits set.

توجه: >> ipaddress.ip_network('192.168.0.0/28')

IPv4Network('192.168.0.0/28')

Return an IPv4Interface or IPv6Interface object depending on the IP address passed as argument. *address* is a string or integer representing the IP address. Either IPv4 or IPv6 addresses may be supplied; integers less than `2**32 will be considered to be IPv4 by default. A ValueError` is raised if *address* does not represent a valid IPv4 or IPv6 address.

One downside of these convenience functions is that the need to handle both IPv4 and IPv6 formats means that error messages provide minimal information on the precise error, as the functions don't know whether the IPv4 or IPv6 format was intended. More detailed error reporting can be obtained by calling the appropriate version specific class constructors directly.

IP Addresses

Address objects

The IPv4Address and IPv6Address objects share a lot of common attributes. Some attributes that are only meaningful for IPv6 addresses are also implemented by IPv4Address objects, in order to make it easier to write code that handles both IP versions correctly. Address objects are hashable, so they can be used as keys in dictionaries.

Construct an IPv4 address. An AddressValueError is raised if *address* is not a valid IPv4 address.

The following constitutes a valid IPv4 address:

  1. A string in decimal-dot notation, consisting of four decimal integers in

the inclusive range 0--255, separated by dots (e.g. `192.168.0.1`). Each integer represents an octet (byte) in the address. Leading zeroes are not tolerated to prevent confusion with octal notation.

  1. An integer that fits into 32 bits.
  2. An integer packed into a bytes object of length 4 (most

significant octet first).

توجه: >> ipaddress.IPv4Address('192.168.0.1')

IPv4Address('192.168.0.1')

توجه: >> ipaddress.IPv4Address(3232235521)

IPv4Address('192.168.0.1')

توجه: >> ipaddress.IPv4Address(b'\xC0\xA8\x00\x01')

IPv4Address('192.168.0.1')

Leading zeros are tolerated, even in ambiguous cases that look like octal notation.

Leading zeros are no longer tolerated and are treated as an error. IPv4 address strings are now parsed as strict as glibc ~socket.inet_pton.

The appropriate version number: `4 for IPv4, 6` for IPv6.

Made available on the class.

The total number of bits in the address representation for this version: `32 for IPv4, 128` for IPv6.

The prefix defines the number of leading bits in an address that are compared to determine whether or not an address is part of a network.

Made available on the class.

The string representation in dotted decimal notation. Leading zeroes are never included in the representation.

As IPv4 does not define a shorthand notation for addresses with octets set to zero, these two attributes are always the same as `str(addr)` for IPv4 addresses. Exposing these attributes makes it easier to write display code that can handle both IPv4 and IPv6 addresses.

The binary representation of this address - a bytes object of the appropriate length (most significant octet first). This is 4 bytes for IPv4 and 16 bytes for IPv6.

The name of the reverse DNS PTR record for the IP address, e.g.::

توجه: >> ipaddress.ip_address("127.0.0.1").reverse_pointer

'1.0.0.127.in-addr.arpa'

توجه: >> ipaddress.ip_address("2001:db8::1").reverse_pointer

'1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa'

This is the name that could be used for performing a PTR lookup, not the resolved hostname itself.

`True if the address is reserved for multicast use. See 3171 (for IPv4) or 2373` (for IPv6).

`True` if the address is defined as not globally reachable by iana-ipv4-special-registry_ (for IPv4) or iana-ipv6-special-registry_ (for IPv6) with the following exceptions:

  • `is_private is False for the shared address space (100.64.0.0/10`)
  • For IPv4-mapped IPv6-addresses the `is_private` value is determined by the

semantics of the underlying IPv4 addresses and the following condition holds (see IPv6Address.ipv4_mapped)::

address.is_private == address.ipv4_mapped.is_private

`is_private has value opposite to is_global, except for the shared address space (100.64.0.0/10 range) where they are both False`.

Fixed some false positives and false negatives.

  • `192.0.0.0/24 is considered private with the exception of 192.0.0.9/32` and

`192.0.0.10/32 (previously: only the 192.0.0.0/29` sub-range was considered private).

  • `64:ff9b:1::/48` is considered private.
  • `2002::/16` is considered private.
  • There are exceptions within `2001::/23 (otherwise considered private): 2001:1::1/128`,

`2001:1::2/128, 2001:3::/32, 2001:4:112::/48, 2001:20::/28, 2001:30::/28`. The exceptions are not considered private.

`True` if the address is defined as globally reachable by iana-ipv4-special-registry_ (for IPv4) or iana-ipv6-special-registry_ (for IPv6) with the following exception:

For IPv4-mapped IPv6-addresses the `is_private value is determined by the semantics of the underlying IPv4 addresses and the following condition holds (see IPv6Address.ipv4_mapped`)::

address.is_global == address.ipv4_mapped.is_global

`is_global has value opposite to is_private, except for the shared address space (100.64.0.0/10 range) where they are both False`.

Fixed some false positives and false negatives, see is_private for details.

`True if the address is unspecified. See 5735 (for IPv4) or 2373` (for IPv6).

`True if the address is noted as reserved by the IETF. For IPv4, this is only 240.0.0.0/4, the Reserved address block. For IPv6, this is all addresses allocated <iana-ipv6-address-space_>__ as Reserved by IETF` for future use.

`Reserved-by-Protocol` column in iana-ipv4-special-registry_.

currently excluded from that list (see ~IPv6Address.is_site_local & 3879).

`True if this is a loopback address. See 3330 (for IPv4) or 2373` (for IPv6).

`True if the address is reserved for link-local usage. See 3927`.

IPv6Address object representing the IPv4-mapped IPv6 address. See 4291.

Returns a string representation of the IP address, controlled by an explicit format string. *fmt* can be one of the following: `'s', the default option, equivalent to str, 'b' for a zero-padded binary string, 'X' or 'x' for an uppercase or lowercase hexadecimal representation, or 'n', which is equivalent to 'b' for IPv4 addresses and 'x' for IPv6. For binary and hexadecimal representations, the form specifier '#' and the grouping option '_' are available. __format__ is used by format, str.format` and f-strings.

توجه: >> format(ipaddress.IPv4Address('192.168.0.1'))

'192.168.0.1'

توجه: >> '{:#b}'.format(ipaddress.IPv4Address('192.168.0.1'))

'0b11000000101010000000000000000001'

توجه: >> f'{ipaddress.IPv6Address("2001:db8::1000"):s}'

'2001:db8::1000'

توجه: >> format(ipaddress.IPv6Address('2001:db8::1000'), '_X')

'2001_0DB8_0000_0000_0000_0000_0000_1000'

توجه: >> '{:#_n}'.format(ipaddress.IPv6Address('2001:db8::1000'))

'0x2001_0db8_0000_0000_0000_0000_0000_1000'

Construct an IPv6 address. An AddressValueError is raised if *address* is not a valid IPv6 address.

The following constitutes a valid IPv6 address:

  1. A string consisting of eight groups of four hexadecimal digits, each

group representing 16 bits. The groups are separated by colons. This describes an *exploded* (longhand) notation. The string can also be *compressed* (shorthand notation) by various means. See 4291 for details. For example, `"0000:0000:0000:0000:0000:0abc:0007:0def" can be compressed to "::abc:7:def"`.

Optionally, the string may also have a scope zone ID, expressed with a suffix `%scope_id. If present, the scope ID must be non-empty, and may not contain %. See 4007 for details. For example, fe80::1234%1 might identify address fe80::1234` on the first link of the node.

  1. An integer that fits into 128 bits.
  2. An integer packed into a bytes object of length 16, big-endian.

توجه: >> ipaddress.IPv6Address('2001:db8::1000')

IPv6Address('2001:db8::1000')

توجه: >> ipaddress.IPv6Address('ff02::5678%1')

IPv6Address('ff02::5678%1')

The short form of the address representation, with leading zeroes in groups omitted and the longest sequence of groups consisting entirely of zeroes collapsed to a single empty group.

This is also the value returned by `str(addr)` for IPv6 addresses.

The long form of the address representation, with all leading zeroes and groups consisting entirely of zeroes included.

For the following attributes and methods, see the corresponding documentation of the IPv4Address class:

`True if the address is reserved for site-local usage. Note that the site-local address space has been deprecated by 3879. Use ~IPv4Address.is_private to test if this address is in the space of unique local addresses as defined by 4193`.

For addresses that appear to be IPv4 mapped addresses in the range `::FFFF:0:0/96 as defined by 4291, this property reports the embedded IPv4 address. For any other address, this property will be None`.

For scoped addresses as defined by 4007, this property identifies the particular zone of the address's scope that the address belongs to, as a string. When no scope zone is specified, this property will be `None`.

For addresses that appear to be 6to4 addresses (starting with `2002::/16) as defined by 3056, this property will report the embedded IPv4 address. For any other address, this property will be None`.

For addresses that appear to be Teredo addresses (starting with `2001::/32) as defined by 4380, this property will report the embedded (server, client) IP address pair. For any other address, this property will be None`.

Refer to the corresponding method documentation in IPv4Address.

Conversion to Strings and Integers

To interoperate with networking interfaces such as the socket module, addresses must be converted to strings or integers. This is handled using the str and int builtin functions::

توجه: >> str(ipaddress.IPv4Address('192.168.0.1'))

'192.168.0.1'

توجه: >> int(ipaddress.IPv4Address('192.168.0.1'))

3232235521

توجه: >> str(ipaddress.IPv6Address('::1'))

'::1'

توجه: >> int(ipaddress.IPv6Address('::1'))

1

Note that IPv6 scoped addresses are converted to integers without scope zone ID.

Operators

Address objects support some operators. Unless stated otherwise, operators can only be applied between compatible objects (i.e. IPv4 with IPv4, IPv6 with IPv6).

Comparison operators """"""""""""""""""""

Address objects can be compared with the usual set of comparison operators. Same IPv6 addresses with different scope zone IDs are not equal. Some examples::

توجه: >> IPv4Address('127.0.0.2') > IPv4Address('127.0.0.1')

True

توجه: >> IPv4Address('127.0.0.2') == IPv4Address('127.0.0.1')

False

توجه: >> IPv4Address('127.0.0.2') != IPv4Address('127.0.0.1')

True

توجه: >> IPv6Address('fe80::1234') == IPv6Address('fe80::1234%1')

False

توجه: >> IPv6Address('fe80::1234%1') != IPv6Address('fe80::1234%2')

True

Arithmetic operators """"""""""""""""""""

Integers can be added to or subtracted from address objects. Some examples::

توجه: >> IPv4Address('127.0.0.2') + 3

IPv4Address('127.0.0.5')

توجه: >> IPv4Address('127.0.0.2') - 3

IPv4Address('126.255.255.255')

توجه: >> IPv4Address('255.255.255.255') + 1

Traceback (most recent call last): File "<stdin>", line 1, in <module> ipaddress.AddressValueError: 4294967296 (>= 2**32) is not permitted as an IPv4 address

IP Network definitions

The IPv4Network and IPv6Network objects provide a mechanism for defining and inspecting IP network definitions. A network definition consists of a *mask* and a *network address*, and as such defines a range of IP addresses that equal the network address when masked (binary AND) with the mask. For example, a network definition with the mask `255.255.255.0 and the network address 192.168.1.0 consists of IP addresses in the inclusive range 192.168.1.0 to 192.168.1.255`.

Prefix, net mask and host mask

There are several equivalent ways to specify IP network masks. A *prefix* `/<nbits> is a notation that denotes how many high-order bits are set in the network mask. A *net mask* is an IP address with some number of high-order bits set. Thus the prefix /24 is equivalent to the net mask 255.255.255.0 in IPv4, or ffff:ff00:: in IPv6. In addition, a *host mask* is the logical inverse of a *net mask*, and is sometimes used (for example in Cisco access control lists) to denote a network mask. The host mask equivalent to /24 in IPv4 is 0.0.0.255`.

Network objects

All attributes implemented by address objects are implemented by network objects as well. In addition, network objects implement additional attributes. All of these are common between IPv4Network and IPv6Network, so to avoid duplication they are only documented for IPv4Network. Network objects are hashable, so they can be used as keys in dictionaries.

Construct an IPv4 network definition. *address* can be one of the following:

  1. A string consisting of an IP address and an optional mask, separated by

a slash (`/). The IP address is the network address, and the mask can be either a single number, which means it's a *prefix*, or a string representation of an IPv4 address. If it's the latter, the mask is interpreted as a *net mask* if it starts with a non-zero field, or as a *host mask* if it starts with a zero field, with the single exception of an all-zero mask which is treated as a *net mask*. If no mask is provided, it's considered to be /32`.

For example, the following *address* specifications are equivalent: `192.168.1.0/24, 192.168.1.0/255.255.255.0 and 192.168.1.0/0.0.0.255`.

  1. An integer that fits into 32 bits. This is equivalent to a

single-address network, with the network address being *address* and the mask being `/32`.

  1. An integer packed into a bytes object of length 4, big-endian.

The interpretation is similar to an integer *address*.

  1. A two-tuple of an address description and a netmask, where the address

description is either a string, a 32-bits integer, a 4-bytes packed integer, or an existing IPv4Address object; and the netmask is either an integer representing the prefix length (e.g. `24) or a string representing the prefix mask (e.g. 255.255.255.0`).

An AddressValueError is raised if *address* is not a valid IPv4 address. A NetmaskValueError is raised if the mask is not valid for an IPv4 address.

If *strict* is `True and host bits are set in the supplied address, then ValueError` is raised. Otherwise, the host bits are masked out to determine the appropriate network address.

Unless stated otherwise, all network methods accepting other network/address objects will raise TypeError if the argument's IP version is incompatible to `self`.

Added the two-tuple form for the *address* constructor parameter.

Refer to the corresponding attribute documentation in IPv4Address.

These attributes are true for the network as a whole if they are true for both the network address and the broadcast address.

The network address for the network. The network address and the prefix length together uniquely define a network.

The broadcast address for the network. Packets sent to the broadcast address should be received by every host on the network.

The host mask, as an IPv4Address object.

The net mask, as an IPv4Address object.

A string representation of the network, with the mask in prefix notation.

`with_prefixlen and compressed are always the same as str(network). exploded` uses the exploded form the network address.

A string representation of the network, with the mask in net mask notation.

A string representation of the network, with the mask in host mask notation.

The total number of addresses in the network.

Length of the network prefix, in bits.

Returns an iterator over the usable hosts in the network. The usable hosts are all the IP addresses that belong to the network, except the network address itself and the network broadcast address. For networks with a mask length of 31, the network address and network broadcast address are also included in the result. Networks with a mask of 32 will return a list containing the single host address.

توجه: >> list(ip_network('192.0.2.0/29').hosts()) #doctest: +NORMALIZE_WHITESPACE

[IPv4Address('192.0.2.1'), IPv4Address('192.0.2.2'), IPv4Address('192.0.2.3'), IPv4Address('192.0.2.4'), IPv4Address('192.0.2.5'), IPv4Address('192.0.2.6')]

توجه: >> list(ip_network('192.0.2.0/31').hosts())

[IPv4Address('192.0.2.0'), IPv4Address('192.0.2.1')]

توجه: >> list(ip_network('192.0.2.1/32').hosts())

[IPv4Address('192.0.2.1')]

`True` if this network is partly or wholly contained in *other* or *other* is wholly contained in this network.

Computes the network definitions resulting from removing the given *network* from this one. Returns an iterator of network objects. Raises ValueError if *network* is not completely contained in this network.

توجه: >> n1 = ip_network('192.0.2.0/28') >> n2 = ip_network('192.0.2.1/32') >> list(n1.address_exclude(n2)) #doctest: +NORMALIZE_WHITESPACE

[IPv4Network('192.0.2.8/29'), IPv4Network('192.0.2.4/30'), IPv4Network('192.0.2.2/31'), IPv4Network('192.0.2.0/32')]

The subnets that join to make the current network definition, depending on the argument values. *prefixlen_diff* is the amount our prefix length should be increased by. *new_prefix* is the desired new prefix of the subnets; it must be larger than our prefix. One and only one of *prefixlen_diff* and *new_prefix* must be set. Returns an iterator of network objects.

توجه: >> list(ip_network('192.0.2.0/24').subnets())

[IPv4Network('192.0.2.0/25'), IPv4Network('192.0.2.128/25')]

توجه: >> list(ip_network('192.0.2.0/24').subnets(prefixlen_diff=2)) #doctest: +NORMALIZE_WHITESPACE

[IPv4Network('192.0.2.0/26'), IPv4Network('192.0.2.64/26'), IPv4Network('192.0.2.128/26'), IPv4Network('192.0.2.192/26')]

توجه: >> list(ip_network('192.0.2.0/24').subnets(new_prefix=26)) #doctest: +NORMALIZE_WHITESPACE

[IPv4Network('192.0.2.0/26'), IPv4Network('192.0.2.64/26'), IPv4Network('192.0.2.128/26'), IPv4Network('192.0.2.192/26')]

توجه: >> list(ip_network('192.0.2.0/24').subnets(new_prefix=23))

Traceback (most recent call last): File "<stdin>", line 1, in <module> raise ValueError('new prefix must be longer') ValueError: new prefix must be longer

توجه: >> list(ip_network('192.0.2.0/24').subnets(new_prefix=25))

[IPv4Network('192.0.2.0/25'), IPv4Network('192.0.2.128/25')]

The supernet containing this network definition, depending on the argument values. *prefixlen_diff* is the amount our prefix length should be decreased by. *new_prefix* is the desired new prefix of the supernet; it must be smaller than our prefix. One and only one of *prefixlen_diff* and *new_prefix* must be set. Returns a single network object.

توجه: >> ip_network('192.0.2.0/24').supernet()

IPv4Network('192.0.2.0/23')

توجه: >> ip_network('192.0.2.0/24').supernet(prefixlen_diff=2)

IPv4Network('192.0.0.0/22')

توجه: >> ip_network('192.0.2.0/24').supernet(new_prefix=20)

IPv4Network('192.0.0.0/20')

Return `True` if this network is a subnet of *other*.

توجه: >> a = ip_network('192.168.1.0/24') >> b = ip_network('192.168.1.128/30') >> b.subnet_of(a)

True

Return `True` if this network is a supernet of *other*.

توجه: >> a = ip_network('192.168.1.0/24') >> b = ip_network('192.168.1.128/30') >> a.supernet_of(b)

True

Compare this network to *other*. In this comparison only the network addresses are considered; host bits aren't. Returns either `-1, 0 or 1`.

توجه: >> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.2/32'))

-1

توجه: >> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.0/32'))

1

توجه: >> ip_network('192.0.2.1/32').compare_networks(ip_network('192.0.2.1/32'))

0

It uses the same ordering and comparison algorithm as "<", "==", and ">"

Construct an IPv6 network definition. *address* can be one of the following:

  1. A string consisting of an IP address and an optional prefix length,

separated by a slash (`/). The IP address is the network address, and the prefix length must be a single number, the *prefix*. If no prefix length is provided, it's considered to be /128`.

Note that currently expanded netmasks are not supported. That means `2001:db00::0/24 is a valid argument while 2001:db00::0/ffff:ff00::` is not.

  1. An integer that fits into 128 bits. This is equivalent to a

single-address network, with the network address being *address* and the mask being `/128`.

  1. An integer packed into a bytes object of length 16, big-endian.

The interpretation is similar to an integer *address*.

  1. A two-tuple of an address description and a netmask, where the address

description is either a string, a 128-bits integer, a 16-bytes packed integer, or an existing IPv6Address object; and the netmask is an integer representing the prefix length.

An AddressValueError is raised if *address* is not a valid IPv6 address. A NetmaskValueError is raised if the mask is not valid for an IPv6 address.

If *strict* is `True and host bits are set in the supplied address, then ValueError` is raised. Otherwise, the host bits are masked out to determine the appropriate network address.

Added the two-tuple form for the *address* constructor parameter.

Returns an iterator over the usable hosts in the network. The usable hosts are all the IP addresses that belong to the network, except the Subnet-Router anycast address. For networks with a mask length of 127, the Subnet-Router anycast address is also included in the result. Networks with a mask of 128 will return a list containing the single host address.

Refer to the corresponding attribute documentation in IPv4Network.

This attribute is true for the network as a whole if it is true for both the network address and the broadcast address.

Operators

Network objects support some operators. Unless stated otherwise, operators can only be applied between compatible objects (i.e. IPv4 with IPv4, IPv6 with IPv6).

Logical operators """""""""""""""""

Network objects can be compared with the usual set of logical operators. Network objects are ordered first by network address, then by net mask.

Iteration """""""""

Network objects can be iterated to list all the addresses belonging to the network. For iteration, *all* hosts are returned, including unusable hosts (for usable hosts, use the ~IPv4Network.hosts method). An example::

توجه: >> for addr in IPv4Network('192.0.2.0/28'):

... addr ... IPv4Address('192.0.2.0') IPv4Address('192.0.2.1') IPv4Address('192.0.2.2') IPv4Address('192.0.2.3') IPv4Address('192.0.2.4') IPv4Address('192.0.2.5') IPv4Address('192.0.2.6') IPv4Address('192.0.2.7') IPv4Address('192.0.2.8') IPv4Address('192.0.2.9') IPv4Address('192.0.2.10') IPv4Address('192.0.2.11') IPv4Address('192.0.2.12') IPv4Address('192.0.2.13') IPv4Address('192.0.2.14') IPv4Address('192.0.2.15')

Networks as containers of addresses """""""""""""""""""""""""""""""""""

Network objects can act as containers of addresses. Some examples::

توجه: >> IPv4Network('192.0.2.0/28')[0]

IPv4Address('192.0.2.0')

توجه: >> IPv4Network('192.0.2.0/28')[15]

IPv4Address('192.0.2.15')

توجه: >> IPv4Address('192.0.2.6') in IPv4Network('192.0.2.0/28')

True

توجه: >> IPv4Address('192.0.3.6') in IPv4Network('192.0.2.0/28')

False

Interface objects

Interface objects are hashable, so they can be used as keys in dictionaries.

Construct an IPv4 interface. The meaning of *address* is as in the constructor of IPv4Network, except that arbitrary host addresses are always accepted.

IPv4Interface is a subclass of IPv4Address, so it inherits all the attributes from that class. In addition, the following attributes are available:

The address (IPv4Address) without network information.

توجه: >> interface = IPv4Interface('192.0.2.5/24') >> interface.ip

IPv4Address('192.0.2.5')

The network (IPv4Network) this interface belongs to.

توجه: >> interface = IPv4Interface('192.0.2.5/24') >> interface.network

IPv4Network('192.0.2.0/24')

A string representation of the interface with the mask in prefix notation.

توجه: >> interface = IPv4Interface('192.0.2.5/24') >> interface.with_prefixlen

'192.0.2.5/24'

A string representation of the interface with the network as a net mask.

توجه: >> interface = IPv4Interface('192.0.2.5/24') >> interface.with_netmask

'192.0.2.5/255.255.255.0'

A string representation of the interface with the network as a host mask.

توجه: >> interface = IPv4Interface('192.0.2.5/24') >> interface.with_hostmask

'192.0.2.5/0.0.0.255'

Construct an IPv6 interface. The meaning of *address* is as in the constructor of IPv6Network, except that arbitrary host addresses are always accepted.

IPv6Interface is a subclass of IPv6Address, so it inherits all the attributes from that class. In addition, the following attributes are available:

Refer to the corresponding attribute documentation in IPv4Interface.

Operators

Interface objects support some operators. Unless stated otherwise, operators can only be applied between compatible objects (i.e. IPv4 with IPv4, IPv6 with IPv6).

Logical operators """""""""""""""""

Interface objects can be compared with the usual set of logical operators.

For equality comparison (`== and !=`), both the IP address and network must be the same for the objects to be equal. An interface will not compare equal to any address or network object.

For ordering (`<, >`, etc) the rules are different. Interface and address objects with the same IP version can be compared, and the address objects will always sort before the interface objects. Two interface objects are first compared by their networks and, if those are the same, then by their IP addresses.

Other Module Level Functions

The module also provides the following module level functions:

Represent an address as 4 packed bytes in network (big-endian) order. *address* is an integer representation of an IPv4 IP address. A ValueError is raised if the integer is negative or too large to be an IPv4 IP address.

توجه: >> ipaddress.ip_address(3221225985)

IPv4Address('192.0.2.1')

توجه: >> ipaddress.v4_int_to_packed(3221225985)

b'\xc0\x00\x02\x01'

Represent an address as 16 packed bytes in network (big-endian) order. *address* is an integer representation of an IPv6 IP address. A ValueError is raised if the integer is negative or too large to be an IPv6 IP address.

Return an iterator of the summarized network range given the first and last IP addresses. *first* is the first IPv4Address or IPv6Address in the range and *last* is the last IPv4Address or IPv6Address in the range. A TypeError is raised if *first* or *last* are not IP addresses or are not of the same version. A ValueError is raised if *last* is not greater than *first* or if *first* address version is not 4 or 6.

توجه: >> [ipaddr for ipaddr in ipaddress.summarize_address_range(

... ipaddress.IPv4Address('192.0.2.0'), ... ipaddress.IPv4Address('192.0.2.130'))] [IPv4Network('192.0.2.0/25'), IPv4Network('192.0.2.128/31'), IPv4Network('192.0.2.130/32')]

Return an iterator of the collapsed IPv4Network or IPv6Network objects. *addresses* is an iterable of IPv4Network or IPv6Network objects. A TypeError is raised if *addresses* contains mixed version objects.

توجه: >> [ipaddr for ipaddr in

... ipaddress.collapse_addresses([ipaddress.IPv4Network('192.0.2.0/25'), ... ipaddress.IPv4Network('192.0.2.128/25')])] [IPv4Network('192.0.2.0/24')]

Return a key suitable for sorting between networks and addresses. Address and Network objects are not sortable by default; they're fundamentally different, so the expression::

IPv4Address('192.0.2.0') <= IPv4Network('192.0.2.0/24')

doesn't make sense. There are some times however, where you may wish to have !ipaddress sort these anyway. If you need to do this, you can use this function as the *key* argument to sorted.

*obj* is either a network or address object.

Custom Exceptions

To support more specific error reporting from class constructors, the module defines the following exceptions:

Any value error related to the address.

Any value error related to the net mask.