:mod:`!codecs` --- Codec registry and base classes

فهرست فصل‌ها دانلود آرشیوناشر

Python 3.14 Docs · نسخهٔ 3.14.10 · PSF License

:mod:!codecs --- Codec registry and base classes

:synopsis: Encode and decode data and streams.

Source code: Lib/codecs.py

single: Unicode single: Codecs pair: Codecs; encode pair: Codecs; decode single: streams pair: stackable; streams

--------------

This module defines base classes for standard Python codecs (encoders and decoders) and provides access to the internal Python codec registry, which manages the codec and error handling lookup process. Most standard codecs are text encodings <text encoding>, which encode text to bytes (and decode bytes to text), but there are also codecs provided that encode text to text, and bytes to bytes. Custom codecs may encode and decode between arbitrary types, but some module features are restricted to be used specifically with text encodings <text encoding> or with codecs that encode to bytes.

The module defines the following functions for encoding and decoding with any codec:

Encodes *obj* using the codec registered for *encoding*.

*Errors* may be given to set the desired error handling scheme. The default error handler is `'strict' meaning that encoding errors raise ValueError (or a more codec specific subclass, such as UnicodeEncodeError). Refer to codec-base-classes` for more information on codec error handling.

Decodes *obj* using the codec registered for *encoding*.

*Errors* may be given to set the desired error handling scheme. The default error handler is `'strict' meaning that decoding errors raise ValueError (or a more codec specific subclass, such as UnicodeDecodeError). Refer to codec-base-classes` for more information on codec error handling.

Return a mapping suitable for encoding with a custom single-byte encoding. Given a str *string* of up to 256 characters representing a decoding table, returns either a compact internal mapping object `EncodingMap or a dictionary <dict> mapping character ordinals to byte values. Raises a TypeError` on invalid input.

The full details for each codec can also be looked up directly:

Looks up the codec info in the Python codec registry and returns a CodecInfo object as defined below.

Encodings are first looked up in the registry's cache. If not found, the list of registered search functions is scanned. If no CodecInfo object is found, a LookupError is raised. Otherwise, the CodecInfo object is stored in the cache and returned to the caller.

Codec details when looking up the codec registry. The constructor arguments are stored in attributes of the same name:

The name of the encoding.

decode

The stateless encoding and decoding functions. These must be functions or methods which have the same interface as the ~Codec.encode and ~Codec.decode methods of Codec instances (see Codec Interface <codec-objects>). The functions or methods are expected to work in a stateless mode.

incrementaldecoder

Incremental encoder and decoder classes or factory functions. These have to provide the interface defined by the base classes IncrementalEncoder and IncrementalDecoder, respectively. Incremental codecs can maintain state.

streamreader

Stream writer and reader classes or factory functions. These have to provide the interface defined by the base classes StreamWriter and StreamReader, respectively. Stream codecs can maintain state.

To simplify access to the various codec components, the module provides these additional functions which use lookup for the codec lookup:

Look up the codec for the given encoding and return its encoder function.

Raises a LookupError in case the encoding cannot be found.

Look up the codec for the given encoding and return its decoder function.

Raises a LookupError in case the encoding cannot be found.

Look up the codec for the given encoding and return its incremental encoder class or factory function.

Raises a LookupError in case the encoding cannot be found or the codec doesn't support an incremental encoder.

Look up the codec for the given encoding and return its incremental decoder class or factory function.

Raises a LookupError in case the encoding cannot be found or the codec doesn't support an incremental decoder.

Look up the codec for the given encoding and return its StreamReader class or factory function.

Raises a LookupError in case the encoding cannot be found.

Look up the codec for the given encoding and return its StreamWriter class or factory function.

Raises a LookupError in case the encoding cannot be found.

Custom codecs are made available by registering a suitable codec search function:

Register a codec search function. Search functions are expected to take one argument, being the encoding name in all lower case letters with hyphens and spaces converted to underscores, and return a CodecInfo object. In case a search function cannot find a given encoding, it should return `None`.

Hyphens and spaces are converted to underscore.

Unregister a codec search function and clear the registry's cache. If the search function is not registered, do nothing.

While the builtin open and the associated io module are the recommended approach for working with encoded text files, this module provides additional utility functions and classes that allow the use of a wider range of codecs when working with binary files:

Open an encoded file using the given *mode* and return an instance of StreamReaderWriter, providing transparent encoding/decoding. The default file mode is `'r'`, meaning to open the file in read mode.

If *encoding* is not `None, then the underlying encoded files are always opened in binary mode. No automatic conversion of '\n' is done on reading and writing. The *mode* argument may be any binary mode acceptable to the built-in open function; the 'b'` is automatically added.

*encoding* specifies the encoding which is to be used for the file. Any encoding that encodes to and decodes from bytes is allowed, and the data types supported by the file methods depend on the codec used.

*errors* may be given to define the error handling. It defaults to `'strict' which causes a ValueError` to be raised in case an encoding error occurs.

*buffering* has the same meaning as for the built-in open function. It defaults to -1 which means that the default buffer size will be used.

The `'U'` mode has been removed.

codecs.open has been superseded by open.

Return a StreamRecoder instance, a wrapped version of *file* which provides transparent transcoding. The original file is closed when the wrapped version is closed.

Data written to the wrapped file is decoded according to the given *data_encoding* and then written to the original file as bytes using *file_encoding*. Bytes read from the original file are decoded according to *file_encoding*, and the result is encoded using *data_encoding*.

If *file_encoding* is not given, it defaults to *data_encoding*.

*errors* may be given to define the error handling. It defaults to `'strict', which causes ValueError` to be raised in case an encoding error occurs.

Uses an incremental encoder to iteratively encode the input provided by *iterator*. *iterator* must yield str objects. This function is a generator. The *errors* argument (as well as any other keyword argument) is passed through to the incremental encoder.

This function requires that the codec accept text str objects to encode. Therefore it does not support bytes-to-bytes encoders such as `base64_codec`.

Uses an incremental decoder to iteratively decode the input provided by *iterator*. *iterator* must yield bytes objects. This function is a generator. The *errors* argument (as well as any other keyword argument) is passed through to the incremental decoder.

This function requires that the codec accept bytes objects to decode. Therefore it does not support text-to-text encoders such as `rot_13, although rot_13 may be used equivalently with iterencode`.

Return a tuple containing the raw bytes of *buffer*, a buffer-compatible object <bufferobjects> or str (encoded to UTF-8 before processing), and their length in bytes.

The *errors* argument is ignored.

pycon
>>> codecs.readbuffer_encode(b"Zito")
(b'Zito', 4)

The module also provides the following constants which are useful for reading and writing to platform dependent files:

BOM_BE BOM_LE BOM_UTF8 BOM_UTF16 BOM_UTF16_BE BOM_UTF16_LE BOM_UTF32 BOM_UTF32_BE BOM_UTF32_LE

These constants define various byte sequences, being Unicode byte order marks (BOMs) for several encodings. They are used in UTF-16 and UTF-32 data streams to indicate the byte order used, and in UTF-8 as a Unicode signature. BOM_UTF16 is either BOM_UTF16_BE or BOM_UTF16_LE depending on the platform's native byte order, BOM is an alias for BOM_UTF16, BOM_LE for BOM_UTF16_LE and BOM_BE for BOM_UTF16_BE. The others represent the BOM in UTF-8 and UTF-32 encodings.

Codec Base Classes

The !codecs module defines a set of base classes which define the interfaces for working with codec objects, and can also be used as the basis for custom codec implementations.

Each codec has to define four interfaces to make it usable as codec in Python: stateless encoder, stateless decoder, stream reader and stream writer. The stream reader and writers typically reuse the stateless encoder/decoder to implement the file protocols. Codec authors also need to define how the codec will handle encoding and decoding errors.

Error Handlers

To simplify and standardize error handling, codecs may implement different error handling schemes by accepting the *errors* string argument:

توجه: >> 'German ß, ♬'.encode(encoding='ascii', errors='backslashreplace')

b'German \\xdf, \\u266c'

توجه: >> 'German ß, ♬'.encode(encoding='ascii', errors='xmlcharrefreplace')

b'German &#223;, &#9836;'

pair: strict; error handler's name pair: ignore; error handler's name pair: replace; error handler's name pair: backslashreplace; error handler's name pair: surrogateescape; error handler's name single: ? (question mark); replacement character single: \ (backslash); escape sequence single: \x; escape sequence single: \u; escape sequence single: \U; escape sequence

The following error handlers can be used with all Python standard-encodings codecs:

+-------------------------+-----------------------------------------------+

ValueMeaning

+=========================+===============================================+

`'strict'`Raise UnicodeError (or a subclass),
this is the default. Implemented in
strict_errors.

+-------------------------+-----------------------------------------------+

`'ignore'`Ignore the malformed data and continue without
further notice. Implemented in
ignore_errors.

+-------------------------+-----------------------------------------------+

`'replace'`Replace with a replacement marker. On
encoding, use `?` (ASCII character). On
decoding, use `�` (U+FFFD, the official
REPLACEMENT CHARACTER). Implemented in
replace_errors.

+-------------------------+-----------------------------------------------+

`'backslashreplace'`Replace with backslashed escape sequences.
On encoding, use hexadecimal form of Unicode
code point with formats \\x{hh}
\\u{xxxx} \\U{xxxxxxxx}.
On decoding, use hexadecimal form of byte
value with format \\x{hh}.
Implemented in
backslashreplace_errors.

+-------------------------+-----------------------------------------------+

`'surrogateescape'`On decoding, replace byte with individual
surrogate code ranging from `U+DC80` to
`U+DCFF`. This code will then be turned
back into the same byte when the
`'surrogateescape'` error handler is used
when encoding the data. (See 383 for
more.)

+-------------------------+-----------------------------------------------+

pair: xmlcharrefreplace; error handler's name pair: namereplace; error handler's name single: \N; escape sequence

The following error handlers are only applicable to encoding (within text encodings <text encoding>):

+-------------------------+-----------------------------------------------+

ValueMeaning

+=========================+===============================================+

`'xmlcharrefreplace'`Replace with XML/HTML numeric character
reference, which is a decimal form of Unicode
code point with format &#{num};.
Implemented in
xmlcharrefreplace_errors.

+-------------------------+-----------------------------------------------+

`'namereplace'`Replace with `\N{...}` escape sequences,
what appears in the braces is the Name
property from Unicode Character Database.
Implemented in namereplace_errors.

+-------------------------+-----------------------------------------------+

pair: surrogatepass; error handler's name

In addition, the following error handler is specific to the given codecs:

+-------------------+------------------------+-------------------------------------------+

ValueCodecsMeaning

+===================+========================+===========================================+

`'surrogatepass'`utf-8, utf-16, utf-32,Allow encoding and decoding surrogate code
utf-16-be, utf-16-le,point (`U+D800 - U+DFFF`) as normal
utf-32-be, utf-32-lecode point. Otherwise these codecs treat
the presence of surrogate code point in
str as an error.

+-------------------+------------------------+-------------------------------------------+

The `'surrogateescape' and 'surrogatepass'` error handlers.

The `'surrogatepass'` error handler now works with utf-16\* and utf-32\* codecs.

The `'namereplace'` error handler.

The `'backslashreplace'` error handler now works with decoding and translating.

The set of allowed values can be extended by registering a new named error handler:

Register the error handling function *error_handler* under the name *name*. The *error_handler* argument will be called during encoding and decoding in case of an error, when *name* is specified as the errors parameter.

For encoding, *error_handler* will be called with a UnicodeEncodeError instance, which contains information about the location of the error. The error handler must either raise this or a different exception, or return a tuple with a replacement for the unencodable part of the input and a position where encoding should continue. The replacement may be either str or bytes. If the replacement is bytes, the encoder will simply copy them into the output buffer. If the replacement is a string, the encoder will encode the replacement. Encoding continues on original input at the specified position. Negative position values will be treated as being relative to the end of the input string. If the resulting position is out of bound an IndexError will be raised.

Decoding and translating works similarly, except UnicodeDecodeError or UnicodeTranslateError will be passed to the handler and that the replacement from the error handler will be put into the output directly.

Previously registered error handlers (including the standard error handlers) can be looked up by name:

Return the error handler previously registered under the name *name*.

Raises a LookupError in case the handler cannot be found.

The following standard error handlers are also made available as module level functions:

Implements the `'strict'` error handling.

Each encoding or decoding error raises a UnicodeError.

Implements the `'ignore'` error handling.

Malformed data is ignored; encoding or decoding is continued without further notice.

Implements the `'replace'` error handling.

Substitutes `? (ASCII character) for encoding errors or �` (U+FFFD, the official REPLACEMENT CHARACTER) for decoding errors.

Implements the `'backslashreplace'` error handling.

Malformed data is replaced by a backslashed escape sequence. On encoding, use the hexadecimal form of Unicode code point with formats \\x{hh} \\u{xxxx} \\U{xxxxxxxx}. On decoding, use the hexadecimal form of byte value with format \\x{hh}.

Works with decoding and translating.

Implements the `'xmlcharrefreplace' error handling (for encoding within text encoding` only).

The unencodable character is replaced by an appropriate XML/HTML numeric character reference, which is a decimal form of Unicode code point with format &#{num}; .

Implements the `'namereplace' error handling (for encoding within text encoding` only).

The unencodable character is replaced by a `\N{...} escape sequence. The set of characters that appear in the braces is the Name property from Unicode Character Database. For example, the German lowercase letter 'ß' will be converted to byte sequence \N{LATIN SMALL LETTER SHARP S}` .

Stateless Encoding and Decoding

The base Codec class defines these methods which also define the function interfaces of the stateless encoder and decoder:

Encodes the object *input* and returns a tuple (output object, length consumed). For instance, text encoding converts a string object to a bytes object using a particular character set encoding (e.g., `cp1252 or iso-8859-1`).

The *errors* argument defines the error handling to apply. It defaults to `'strict'` handling.

The method may not store state in the Codec instance. Use StreamWriter for codecs which have to keep state in order to make encoding efficient.

The encoder must be able to handle zero length input and return an empty object of the output object type in this situation.

Decodes the object *input* and returns a tuple (output object, length consumed). For instance, for a text encoding, decoding converts a bytes object encoded using a particular character set encoding to a string object.

For text encodings and bytes-to-bytes codecs, *input* must be a bytes object or one which provides the read-only buffer interface -- for example, buffer objects and memory mapped files.

The *errors* argument defines the error handling to apply. It defaults to `'strict'` handling.

The method may not store state in the Codec instance. Use StreamReader for codecs which have to keep state in order to make decoding efficient.

The decoder must be able to handle zero length input and return an empty object of the output object type in this situation.

Incremental Encoding and Decoding

The IncrementalEncoder and IncrementalDecoder classes provide the basic interface for incremental encoding and decoding. Encoding/decoding the input isn't done with one call to the stateless encoder/decoder function, but with multiple calls to the ~IncrementalEncoder.encode/~IncrementalDecoder.decode method of the incremental encoder/decoder. The incremental encoder/decoder keeps track of the encoding/decoding process during method calls.

The joined output of calls to the ~IncrementalEncoder.encode/~IncrementalDecoder.decode method is the same as if all the single inputs were joined into one, and this input was encoded/decoded with the stateless encoder/decoder.

IncrementalEncoder Objects

The IncrementalEncoder class is used for encoding an input in multiple steps. It defines the following methods which every incremental encoder must define in order to be compatible with the Python codec registry.

Constructor for an IncrementalEncoder instance.

All incremental encoders must provide this constructor interface. They are free to add additional keyword arguments, but only the ones defined here are used by the Python codec registry.

The IncrementalEncoder may implement different error handling schemes by providing the *errors* keyword argument. See error-handlers for possible values.

The *errors* argument will be assigned to an attribute of the same name. Assigning to this attribute makes it possible to switch between different error handling strategies during the lifetime of the IncrementalEncoder object.

Encodes *object* (taking the current state of the encoder into account) and returns the resulting encoded object. If this is the last call to encode *final* must be true (the default is false).

Reset the encoder to the initial state. The output is discarded: call `.encode(object, final=True)`, passing an empty byte or text string if necessary, to reset the encoder and to get the output.

Return the current state of the encoder which must be an integer. The implementation should make sure that `0` is the most common state. (States that are more complicated than integers can be converted into an integer by marshaling/pickling the state and encoding the bytes of the resulting string into an integer.)

Set the state of the encoder to *state*. *state* must be an encoder state returned by getstate.

IncrementalDecoder Objects

The IncrementalDecoder class is used for decoding an input in multiple steps. It defines the following methods which every incremental decoder must define in order to be compatible with the Python codec registry.

Constructor for an IncrementalDecoder instance.

All incremental decoders must provide this constructor interface. They are free to add additional keyword arguments, but only the ones defined here are used by the Python codec registry.

The IncrementalDecoder may implement different error handling schemes by providing the *errors* keyword argument. See error-handlers for possible values.

The *errors* argument will be assigned to an attribute of the same name. Assigning to this attribute makes it possible to switch between different error handling strategies during the lifetime of the IncrementalDecoder object.

Decodes *object* (taking the current state of the decoder into account) and returns the resulting decoded object. If this is the last call to decode *final* must be true (the default is false). If *final* is true the decoder must decode the input completely and must flush all buffers. If this isn't possible (e.g. because of incomplete byte sequences at the end of the input) it must initiate error handling just like in the stateless case (which might raise an exception).

Reset the decoder to the initial state.

Return the current state of the decoder. This must be a tuple with two items, the first must be the buffer containing the still undecoded input. The second must be an integer and can be additional state info. (The implementation should make sure that `0 is the most common additional state info.) If this additional state info is 0 it must be possible to set the decoder to the state which has no input buffered and 0` as the additional state info, so that feeding the previously buffered input to the decoder returns it to the previous state without producing any output. (Additional state info that is more complicated than integers can be converted into an integer by marshaling/pickling the info and encoding the bytes of the resulting string into an integer.)

Set the state of the decoder to *state*. *state* must be a decoder state returned by getstate.

Stream Encoding and Decoding

The StreamWriter and StreamReader classes provide generic working interfaces which can be used to implement new encoding submodules very easily. See !encodings.utf_8 for an example of how this is done.

StreamWriter Objects

The StreamWriter class is a subclass of Codec and defines the following methods which every stream writer must define in order to be compatible with the Python codec registry.

Constructor for a StreamWriter instance.

All stream writers must provide this constructor interface. They are free to add additional keyword arguments, but only the ones defined here are used by the Python codec registry.

The *stream* argument must be a file-like object open for writing text or binary data, as appropriate for the specific codec.

The StreamWriter may implement different error handling schemes by providing the *errors* keyword argument. See error-handlers for the standard error handlers the underlying stream codec may support.

The *errors* argument will be assigned to an attribute of the same name. Assigning to this attribute makes it possible to switch between different error handling strategies during the lifetime of the StreamWriter object.

Writes the object's contents encoded to the stream.

Writes the concatenated iterable of strings to the stream (possibly by reusing the write method). Infinite or very large iterables are not supported. The standard bytes-to-bytes codecs do not support this method.

Resets the codec buffers used for keeping internal state.

Calling this method should ensure that the data on the output is put into a clean state that allows appending of new fresh data without having to rescan the whole stream to recover state.

In addition to the above methods, the StreamWriter must also inherit all other methods and attributes from the underlying stream.

StreamReader Objects

The StreamReader class is a subclass of Codec and defines the following methods which every stream reader must define in order to be compatible with the Python codec registry.

Constructor for a StreamReader instance.

All stream readers must provide this constructor interface. They are free to add additional keyword arguments, but only the ones defined here are used by the Python codec registry.

The *stream* argument must be a file-like object open for reading text or binary data, as appropriate for the specific codec.

The StreamReader may implement different error handling schemes by providing the *errors* keyword argument. See error-handlers for the standard error handlers the underlying stream codec may support.

The *errors* argument will be assigned to an attribute of the same name. Assigning to this attribute makes it possible to switch between different error handling strategies during the lifetime of the StreamReader object.

The set of allowed values for the *errors* argument can be extended with register_error.

Decodes data from the stream and returns the resulting object.

The *chars* argument indicates the number of decoded code points or bytes to return. The read method will never return more data than requested, but it might return less, if there is not enough available.

The *size* argument indicates the approximate maximum number of encoded bytes or code points to read for decoding. The decoder can modify this setting as appropriate. The default value -1 indicates to read and decode as much as possible. This parameter is intended to prevent having to decode huge files in one step.

The *firstline* flag indicates that it would be sufficient to only return the first line, if there are decoding errors on later lines.

The method should use a greedy read strategy meaning that it should read as much data as is allowed within the definition of the encoding and the given size, e.g. if optional encoding endings or state markers are available on the stream, these should be read too.

Read one line from the input stream and return the decoded data.

*size*, if given, is passed as size argument to the stream's read method.

If *keepends* is false line-endings will be stripped from the lines returned.

Read all lines available on the input stream and return them as a list of lines.

Line-endings are implemented using the codec's decode method and are included in the list entries if *keepends* is true.

*sizehint*, if given, is passed as the *size* argument to the stream's read method.

Resets the codec buffers used for keeping internal state.

Note that no stream repositioning should take place. This method is primarily intended to be able to recover from decoding errors.

In addition to the above methods, the StreamReader must also inherit all other methods and attributes from the underlying stream.

StreamReaderWriter Objects

The StreamReaderWriter is a convenience class that allows wrapping streams which work in both read and write modes.

The design is such that one can use the factory functions returned by the lookup function to construct the instance.

Creates a StreamReaderWriter instance. *stream* must be a file-like object. *Reader* and *Writer* must be factory functions or classes providing the StreamReader and StreamWriter interface resp. Error handling is done in the same way as defined for the stream readers and writers.

StreamReaderWriter instances define the combined interfaces of StreamReader and StreamWriter classes. They inherit all other methods and attributes from the underlying stream.

StreamRecoder Objects

The StreamRecoder translates data from one encoding to another, which is sometimes useful when dealing with different encoding environments.

The design is such that one can use the factory functions returned by the lookup function to construct the instance.

Creates a StreamRecoder instance which implements a two-way conversion: *encode* and *decode* work on the frontend — the data visible to code calling ~StreamReader.read and ~StreamWriter.write, while *Reader* and *Writer* work on the backend — the data in *stream*.

You can use these objects to do transparent transcodings, e.g., from Latin-1 to UTF-8 and back.

The *stream* argument must be a file-like object.

The *encode* and *decode* arguments must adhere to the Codec interface. *Reader* and *Writer* must be factory functions or classes providing objects of the StreamReader and StreamWriter interface respectively.

Error handling is done in the same way as defined for the stream readers and writers.

StreamRecoder instances define the combined interfaces of StreamReader and StreamWriter classes. They inherit all other methods and attributes from the underlying stream.

Encodings and Unicode

Strings are stored internally as sequences of code points in range `U+0000--U+10FFFF. (See 393 for more details about the implementation.) Once a string object is used outside of CPU and memory, endianness and how these arrays are stored as bytes become an issue. As with other codecs, serialising a string into a sequence of bytes is known as *encoding*, and recreating the string from the sequence of bytes is known as *decoding*. There are a variety of different text serialisation codecs, which are collectivity referred to as text encodings <text encoding>`.

The simplest text encoding (called `'latin-1' or 'iso-8859-1') maps the code points 0--255 to the bytes 0x0--0xff, which means that a string object that contains code points above U+00FF can't be encoded with this codec. Doing so will raise a UnicodeEncodeError that looks like the following (although the details of the error message may differ): UnicodeEncodeError: 'latin-1' codec can't encode character '\u1234' in position 3: ordinal not in range(256)`.

There's another group of encodings (the so called charmap encodings) that choose a different subset of all Unicode code points and how these code points are mapped to the bytes `0x0--0xff. To see how this is done simply open e.g. encodings/cp1252.py` (which is an encoding that is used primarily on Windows). There's a string constant with 256 characters that shows you which character is mapped to which byte value.

All of these encodings can only encode 256 of the 1114112 code points defined in Unicode. A simple and straightforward way that can store each Unicode code point, is to store each code point as four consecutive bytes. There are two possibilities: store the bytes in big endian or in little endian order. These two encodings are called `UTF-32-BE and UTF-32-LE respectively. Their disadvantage is that if, for example, you use UTF-32-BE on a little endian machine you will always have to swap bytes on encoding and decoding. Python's UTF-16 and UTF-32 codecs avoid this problem by using the platform's native byte order when no BOM is present. Python follows prevailing platform practice, so native-endian data round-trips without redundant byte swapping, even though the Unicode Standard defaults to big-endian when the byte order is unspecified. When these bytes are read by a CPU with a different endianness, the bytes have to be swapped. To be able to detect the endianness of a UTF-16 or UTF-32 byte sequence, a BOM ("Byte Order Mark") is used. This is the Unicode character U+FEFF. This character can be prepended to every UTF-16 or UTF-32 byte sequence. The byte swapped version of this character (0xFFFE) is an illegal character that may not appear in a Unicode text. When the first character of a UTF-16 or UTF-32 byte sequence is U+FFFE`, the bytes have to be swapped on decoding.

Unfortunately the character `U+FEFF had a second purpose as a ZERO WIDTH NO-BREAK SPACE: a character that has no width and doesn't allow a word to be split. It can e.g. be used to give hints to a ligature algorithm. With Unicode 4.0 using U+FEFF as a ZERO WIDTH NO-BREAK SPACE has been deprecated (with U+2060 (WORD JOINER) assuming this role). Nevertheless Unicode software still must be able to handle U+FEFF in both roles: as a BOM it's a device to determine the storage layout of the encoded bytes, and vanishes once the byte sequence has been decoded into a string; as a ZERO WIDTH NO-BREAK SPACE` it's a normal character that will be decoded like any other.

There's another encoding that is able to encode the full range of Unicode characters: UTF-8. UTF-8 is an 8-bit encoding, which means there are no issues with byte order in UTF-8. Each byte in a UTF-8 byte sequence consists of two parts: marker bits (the most significant bits) and payload bits. The marker bits are a sequence of zero to four `1 bits followed by a 0` bit. Unicode characters are encoded like this (with x being payload bits, which when concatenated give the Unicode character):

+-----------------------------------+----------------------------------------------+

RangeEncoding

+===================================+==============================================+

`U-00000000 ... U-0000007F`0xxxxxxx

+-----------------------------------+----------------------------------------------+

`U-00000080 ... U-000007FF`110xxxxx 10xxxxxx

+-----------------------------------+----------------------------------------------+

`U-00000800 ... U-0000FFFF`1110xxxx 10xxxxxx 10xxxxxx

+-----------------------------------+----------------------------------------------+

`U-00010000 ... U-0010FFFF`11110xxx 10xxxxxx 10xxxxxx 10xxxxxx

+-----------------------------------+----------------------------------------------+

The least significant bit of the Unicode character is the rightmost x bit.

As UTF-8 is an 8-bit encoding no BOM is required and any `U+FEFF character in the decoded string (even if it's the first character) is treated as a ZERO WIDTH NO-BREAK SPACE`.

Without external information it's impossible to reliably determine which encoding was used for encoding a string. Each charmap encoding can decode any random byte sequence. However that's not possible with UTF-8, as UTF-8 byte sequences have a structure that doesn't allow arbitrary byte sequences. To increase the reliability with which a UTF-8 encoding can be detected, Microsoft invented a variant of UTF-8 (that Python calls `"utf-8-sig") for its Notepad program: Before any of the Unicode characters is written to the file, a UTF-8 encoded BOM (which looks like this as a byte sequence: 0xef, 0xbb, 0xbf`) is written. As it's rather improbable that any charmap encoded file starts with these byte values (which would e.g. map to

LATIN SMALL LETTER I WITH DIAERESIS
RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
INVERTED QUESTION MARK

in iso-8859-1), this increases the probability that a `utf-8-sig encoding can be correctly guessed from the byte sequence. So here the BOM is not used to be able to determine the byte order used for generating the byte sequence, but as a signature that helps in guessing the encoding. On encoding the utf-8-sig codec will write 0xef, 0xbb, 0xbf as the first three bytes to the file. On decoding utf-8-sig` will skip those three bytes if they appear as the first three bytes in the file. In UTF-8, the use of the BOM is discouraged and should generally be avoided.

Standard Encodings

Python comes with a number of codecs built-in, either implemented as C functions or with dictionaries as mapping tables. The following table lists the codecs by name, together with a few common aliases, and the languages for which the encoding is likely used. Neither the list of aliases nor the list of languages is meant to be exhaustive. Notice that spelling alternatives that only differ in case or use a hyphen instead of an underscore are also valid aliases because they are equivalent when normalized by ~encodings.normalize_encoding. For example, `'utf-8' is a valid alias for the 'utf_8'` codec.

The below table lists the most common aliases, for a complete list refer to the source aliases.py <Lib/encodings/aliases.py> file.

On Windows, `cpXXX` codecs are available for all code pages. But only codecs listed in the following table are guarantead to exist on other platforms.

Some common encodings can bypass the codecs lookup machinery to improve performance. These optimization opportunities are only recognized by CPython for a limited set of (case insensitive) aliases: utf-8, utf8, latin-1, latin1, iso-8859-1, iso8859-1, mbcs (Windows only), ascii, us-ascii, utf-16, utf16, utf-32, utf32, and the same using underscores instead of dashes. Using alternative aliases for these encodings may result in slower execution.

Optimization opportunity recognized for us-ascii.

Many of the character sets support the same languages. They vary in individual characters (e.g. whether the EURO SIGN is supported or not), and in the assignment of characters to code positions. For the European languages in particular, the following variants typically exist:

  • an ISO 8859 codeset
  • a Microsoft Windows code page, which is typically derived from an 8859 codeset,

but replaces control characters with additional graphic characters

  • an IBM EBCDIC code page
  • an IBM PC code page, which is ASCII compatible

+-----------------+--------------------------------+--------------------------------+

CodecAliasesLanguages

+=================+================================+================================+

ascii646, us-asciiEnglish

+-----------------+--------------------------------+--------------------------------+

big5big5-tw, csbig5Traditional Chinese

+-----------------+--------------------------------+--------------------------------+

big5hkscsbig5-hkscs, hkscsTraditional Chinese

+-----------------+--------------------------------+--------------------------------+

cp037IBM037, IBM039English

+-----------------+--------------------------------+--------------------------------+

cp273273, IBM273, csIBM273German
.. versionadded:: 3.4

+-----------------+--------------------------------+--------------------------------+

cp424EBCDIC-CP-HE, IBM424Hebrew

+-----------------+--------------------------------+--------------------------------+

cp437437, IBM437English

+-----------------+--------------------------------+--------------------------------+

cp500EBCDIC-CP-BE, EBCDIC-CP-CH,Western Europe
IBM500

+-----------------+--------------------------------+--------------------------------+

cp720Arabic

+-----------------+--------------------------------+--------------------------------+

cp737Greek

+-----------------+--------------------------------+--------------------------------+

cp775IBM775Baltic languages

+-----------------+--------------------------------+--------------------------------+

cp850850, IBM850Western Europe

+-----------------+--------------------------------+--------------------------------+

cp852852, IBM852Central and Eastern Europe

+-----------------+--------------------------------+--------------------------------+

cp855855, IBM855Belarusian, Bulgarian,
Macedonian, Russian, Serbian

+-----------------+--------------------------------+--------------------------------+

cp856Hebrew

+-----------------+--------------------------------+--------------------------------+

cp857857, IBM857Turkish

+-----------------+--------------------------------+--------------------------------+

cp858858, IBM00858Western Europe

+-----------------+--------------------------------+--------------------------------+

cp860860, IBM860Portuguese

+-----------------+--------------------------------+--------------------------------+

cp861861, CP-IS, IBM861Icelandic

+-----------------+--------------------------------+--------------------------------+

cp862862, IBM862Hebrew

+-----------------+--------------------------------+--------------------------------+

cp863863, IBM863Canadian

+-----------------+--------------------------------+--------------------------------+

cp864IBM864Arabic

+-----------------+--------------------------------+--------------------------------+

cp865865, IBM865Danish, Norwegian

+-----------------+--------------------------------+--------------------------------+

cp866866, IBM866Russian

+-----------------+--------------------------------+--------------------------------+

cp869869, CP-GR, IBM869Greek

+-----------------+--------------------------------+--------------------------------+

cp874Thai

+-----------------+--------------------------------+--------------------------------+

cp875Greek

+-----------------+--------------------------------+--------------------------------+

cp932932, ms932, mskanji, ms-kanji,Japanese
windows-31j

+-----------------+--------------------------------+--------------------------------+

cp949949, ms949, uhcKorean

+-----------------+--------------------------------+--------------------------------+

cp950950, ms950Traditional Chinese

+-----------------+--------------------------------+--------------------------------+

cp1006Urdu

+-----------------+--------------------------------+--------------------------------+

cp1026ibm1026Turkish

+-----------------+--------------------------------+--------------------------------+

cp11251125, ibm1125, cp866u, rusciiUkrainian
.. versionadded:: 3.4

+-----------------+--------------------------------+--------------------------------+

cp1140IBM01140Western Europe

+-----------------+--------------------------------+--------------------------------+

cp1250windows-1250Central and Eastern Europe

+-----------------+--------------------------------+--------------------------------+

cp1251windows-1251Belarusian, Bulgarian,
Macedonian, Russian, Serbian

+-----------------+--------------------------------+--------------------------------+

cp1252windows-1252Western Europe

+-----------------+--------------------------------+--------------------------------+

cp1253windows-1253Greek

+-----------------+--------------------------------+--------------------------------+

cp1254windows-1254Turkish

+-----------------+--------------------------------+--------------------------------+

cp1255windows-1255Hebrew

+-----------------+--------------------------------+--------------------------------+

cp1256windows-1256Arabic

+-----------------+--------------------------------+--------------------------------+

cp1257windows-1257Baltic languages

+-----------------+--------------------------------+--------------------------------+

cp1258windows-1258Vietnamese

+-----------------+--------------------------------+--------------------------------+

euc_jpeucjp, ujis, u-jisJapanese

+-----------------+--------------------------------+--------------------------------+

euc_jis_2004jisx0213, eucjis2004Japanese

+-----------------+--------------------------------+--------------------------------+

euc_jisx0213eucjisx0213Japanese

+-----------------+--------------------------------+--------------------------------+

euc_kreuckr, korean, ksc5601,Korean
ks_c-5601, ks_c-5601-1987,
ksx1001, ks_x-1001

+-----------------+--------------------------------+--------------------------------+

gb2312chinese, csiso58gb231280,Simplified Chinese
euc-cn, euccn, eucgb2312-cn,
gb2312-1980, gb2312-80,
iso-ir-58

+-----------------+--------------------------------+--------------------------------+

gbk936, cp936, ms936Unified Chinese

+-----------------+--------------------------------+--------------------------------+

gb18030gb18030-2000Unified Chinese

+-----------------+--------------------------------+--------------------------------+

hzhzgb, hz-gb, hz-gb-2312Simplified Chinese

+-----------------+--------------------------------+--------------------------------+

iso2022_jpcsiso2022jp, iso2022jp,Japanese
iso-2022-jp

+-----------------+--------------------------------+--------------------------------+

iso2022_jp_1iso2022jp-1, iso-2022-jp-1Japanese

+-----------------+--------------------------------+--------------------------------+

iso2022_jp_2iso2022jp-2, iso-2022-jp-2Japanese, Korean, Simplified
Chinese, Western Europe, Greek

+-----------------+--------------------------------+--------------------------------+

iso2022_jp_2004iso2022jp-2004,Japanese
iso-2022-jp-2004

+-----------------+--------------------------------+--------------------------------+

iso2022_jp_3iso2022jp-3, iso-2022-jp-3Japanese

+-----------------+--------------------------------+--------------------------------+

iso2022_jp_extiso2022jp-ext, iso-2022-jp-extJapanese

+-----------------+--------------------------------+--------------------------------+

iso2022_krcsiso2022kr, iso2022kr,Korean
iso-2022-kr

+-----------------+--------------------------------+--------------------------------+

latin_1iso-8859-1, iso8859-1, 8859,Western Europe
cp819, latin, latin1, L1

+-----------------+--------------------------------+--------------------------------+

iso8859_2iso-8859-2, latin2, L2Central and Eastern Europe

+-----------------+--------------------------------+--------------------------------+

iso8859_3iso-8859-3, latin3, L3Esperanto, Maltese

+-----------------+--------------------------------+--------------------------------+

iso8859_4iso-8859-4, latin4, L4Northern Europe

+-----------------+--------------------------------+--------------------------------+

iso8859_5iso-8859-5, cyrillicBelarusian, Bulgarian,
Macedonian, Russian, Serbian

+-----------------+--------------------------------+--------------------------------+

iso8859_6iso-8859-6, arabicArabic

+-----------------+--------------------------------+--------------------------------+

iso8859_7iso-8859-7, greek, greek8Greek

+-----------------+--------------------------------+--------------------------------+

iso8859_8iso-8859-8, hebrewHebrew

+-----------------+--------------------------------+--------------------------------+

iso8859_9iso-8859-9, latin5, L5Turkish

+-----------------+--------------------------------+--------------------------------+

iso8859_10iso-8859-10, latin6, L6Nordic languages

+-----------------+--------------------------------+--------------------------------+

iso8859_11iso-8859-11, thaiThai languages

+-----------------+--------------------------------+--------------------------------+

iso8859_13iso-8859-13, latin7, L7Baltic languages

+-----------------+--------------------------------+--------------------------------+

iso8859_14iso-8859-14, latin8, L8Celtic languages

+-----------------+--------------------------------+--------------------------------+

iso8859_15iso-8859-15, latin9, L9Western Europe

+-----------------+--------------------------------+--------------------------------+

iso8859_16iso-8859-16, latin10, L10South-Eastern Europe

+-----------------+--------------------------------+--------------------------------+

johabcp1361, ms1361Korean

+-----------------+--------------------------------+--------------------------------+

koi8_rRussian

+-----------------+--------------------------------+--------------------------------+

koi8_tTajik
.. versionadded:: 3.5

+-----------------+--------------------------------+--------------------------------+

koi8_uUkrainian

+-----------------+--------------------------------+--------------------------------+

kz1048kz_1048, strk1048_2002, rk1048Kazakh
.. versionadded:: 3.5

+-----------------+--------------------------------+--------------------------------+

mac_cyrillicmaccyrillicBelarusian, Bulgarian,
Macedonian, Russian, Serbian

+-----------------+--------------------------------+--------------------------------+

mac_greekmacgreekGreek

+-----------------+--------------------------------+--------------------------------+

mac_icelandmacicelandIcelandic

+-----------------+--------------------------------+--------------------------------+

mac_latin2maclatin2, maccentraleurope,Central and Eastern Europe
mac_centeuro

+-----------------+--------------------------------+--------------------------------+

mac_romanmacroman, macintoshWestern Europe

+-----------------+--------------------------------+--------------------------------+

mac_turkishmacturkishTurkish

+-----------------+--------------------------------+--------------------------------+

ptcp154csptcp154, pt154, cp154,Kazakh
cyrillic-asian

+-----------------+--------------------------------+--------------------------------+

shift_jiscsshiftjis, shiftjis, sjis,Japanese
s_jis

+-----------------+--------------------------------+--------------------------------+

shift_jis_2004shiftjis2004, sjis_2004,Japanese
sjis2004

+-----------------+--------------------------------+--------------------------------+

shift_jisx0213shiftjisx0213, sjisx0213,Japanese
s_jisx0213

+-----------------+--------------------------------+--------------------------------+

utf_32U32, utf32all languages

+-----------------+--------------------------------+--------------------------------+

utf_32_beUTF-32BEall languages

+-----------------+--------------------------------+--------------------------------+

utf_32_leUTF-32LEall languages

+-----------------+--------------------------------+--------------------------------+

utf_16U16, utf16all languages

+-----------------+--------------------------------+--------------------------------+

utf_16_beUTF-16BEall languages

+-----------------+--------------------------------+--------------------------------+

utf_16_leUTF-16LEall languages

+-----------------+--------------------------------+--------------------------------+

utf_7U7, unicode-1-1-utf-7all languages

+-----------------+--------------------------------+--------------------------------+

utf_8U8, UTF, utf8, cp65001all languages

+-----------------+--------------------------------+--------------------------------+

utf_8_sigall languages

+-----------------+--------------------------------+--------------------------------+

The utf-16\* and utf-32\* encoders no longer allow surrogate code points (`U+D800--U+DFFF`) to be encoded. The utf-32\* decoders no longer decode byte sequences that correspond to surrogate code points.

`cp65001 is now an alias to utf_8`.

On Windows, `cpXXX` codecs are now available for all code pages.

Python Specific Encodings

A number of predefined codecs are specific to Python, so their codec names have no meaning outside Python. These are listed in the tables below based on the expected input and output types (note that while text encodings are the most common use case for codecs, the underlying codec infrastructure supports arbitrary data transforms rather than just text encodings). For asymmetric codecs, the stated meaning describes the encoding direction.

Text Encodings

The following codecs provide str to bytes encoding and bytes-like object to str decoding, similar to the Unicode text encodings.

+--------------------+---------+---------------------------+

CodecAliasesMeaning

+====================+=========+===========================+

idnaImplement 3490,
see also
encodings.idna.
Only `errors='strict'`
is supported.
.. warning::
This codec builds on
`punycode`, whose
algorithms scale
poorly, so limit the
length of untrusted
input.

+--------------------+---------+---------------------------+

mbcsansi,Windows only: Encode the
dbcsoperand according to the
ANSI codepage (CP_ACP).

+--------------------+---------+---------------------------+

oemWindows only: Encode the
operand according to the
OEM codepage (CP_OEMCP).
.. versionadded:: 3.6

+--------------------+---------+---------------------------+

palmosEncoding of PalmOS 3.5.

+--------------------+---------+---------------------------+

punycodeImplement 3492.
Stateful codecs are not
supported.
.. warning::
The decoding and
encoding algorithms
scale poorly, so
limit the length of
untrusted input.

+--------------------+---------+---------------------------+

raw_unicode_escapeLatin-1 encoding with
\\u{XXXX} and
\\U{XXXXXXXX}
for other code points.
Existing
backslashes are not
escaped in any way.
It is used in the Python
pickle protocol.

+--------------------+---------+---------------------------+

undefinedThis Codec should only
be used for testing
purposes.
Raise an exception for
all conversions, even
empty strings. The error
handler is ignored.

+--------------------+---------+---------------------------+

unicode_escapeEncoding suitable as the
contents of a Unicode
literal in ASCII-encoded
Python source code,
except that quotes are
not escaped. Decode
from Latin-1 source code.
Beware that Python source
code actually uses UTF-8
by default.

+--------------------+---------+---------------------------+

"unicode_internal" codec is removed.

Binary Transforms

The following codecs provide binary transforms: bytes-like object to bytes mappings. They are not supported by bytes.decode (which only produces str output).

+----------------------+------------------+------------------------------+------------------------------+

CodecAliasesMeaningEncoder / decoder

+======================+==================+==============================+==============================+

base64_codec [#b64]_base64, base_64Convert the operand tobase64.encodebytes /
multiline MIME base64 (thebase64.decodebytes
result always includes a
trailing `'\n'`).
.. versionchanged:: 3.4
accepts any
bytes-like object
as input for encoding and
decoding

+----------------------+------------------+------------------------------+------------------------------+

bz2_codecbz2Compress the operand usingbz2.compress /
bz2.bz2.decompress

+----------------------+------------------+------------------------------+------------------------------+

hex_codechexConvert the operand tobinascii.b2a_hex /
hexadecimalbinascii.a2b_hex
representation, with two
digits per byte.

+----------------------+------------------+------------------------------+------------------------------+

quopri_codecquopri,Convert the operand to MIMEquopri.encode with
quotedprintable,quoted printable.`quotetabs=True` /
quoted_printablequopri.decode

+----------------------+------------------+------------------------------+------------------------------+

uu_codecuuConvert the operand using
uuencode.

+----------------------+------------------+------------------------------+------------------------------+

zlib_codeczip, zlibCompress the operand usingzlib.compress /
gzip.zlib.decompress

+----------------------+------------------+------------------------------+------------------------------+

`'base64_codec' also accepts ASCII-only instances of str` for decoding

Restoration of the binary transforms.

Restoration of the aliases for the binary transforms.

Standalone Codec Functions

The following functions provide encoding and decoding functionality similar to codecs, but are not available as named codecs through codecs.encode or codecs.decode. They are used internally (for example, by pickle) and behave similarly to the `string_escape` codec that was removed in Python 3.

Encode *input* using escape sequences. Similar to how repr on bytes produces escaped byte values.

*input* must be a bytes object.

Returns a tuple `(output, length) where *output* is a bytes` object and *length* is the number of bytes consumed.

Decode *input* from escape sequences back to the original bytes.

*input* must be a bytes-like object.

Returns a tuple `(output, length) where *output* is a bytes` object and *length* is the number of bytes consumed.

Text Transforms

The following codec provides a text transform: a str to str mapping. It is not supported by str.encode (which only produces bytes output).

+--------------------+---------+---------------------------+

CodecAliasesMeaning

+====================+=========+===========================+

rot_13rot13Return the Caesar-cypher
encryption of the
operand.

+--------------------+---------+---------------------------+

Restoration of the `rot_13` text transform.

Restoration of the `rot13` alias.

:mod:!encodings --- Encodings package

:synopsis: Encodings package

This module implements the following functions:

Normalize encoding name *encoding*.

Normalization works as follows: all non-alphanumeric characters except the dot used for Python package names are collapsed and replaced with a single underscore, leading and trailing underscores are removed. For example, `' -;#' becomes '_'`.

Note that *encoding* should be ASCII only.

The following functions should not be used directly, except for testing purposes; codecs.lookup should be used instead.

Search for the codec module corresponding to the given encoding name *encoding*.

This function first normalizes the *encoding* using normalize_encoding, then looks for a corresponding alias. It attempts to import a codec module from the encodings package using either the alias or the normalized name. If the module is found and defines a valid `getregentry() function that returns a codecs.CodecInfo` object, the codec is cached and returned.

If the codec module defines a `getaliases()` function any returned aliases are registered for future use.

Search for a Windows code page encoding *encoding* of the form `cpXXXX`.

If the code page is valid and supported, return a codecs.CodecInfo object for it.

This module implements the following exception:

Raised when a codec is invalid or incompatible.

:mod:!encodings.idna --- Internationalized Domain Names in Applications

:synopsis: Internationalized Domain Names implementation

This module implements 3490 (Internationalized Domain Names in Applications) and 3492 (Nameprep: A Stringprep Profile for Internationalized Domain Names (IDN)). It builds upon the `punycode encoding and stringprep`.

This module builds on `punycode`, whose algorithms scale poorly, so limit the length of untrusted input.

If you need the IDNA 2008 standard from 5891 and 5895, use the third-party idna module.

These RFCs together define a protocol to support non-ASCII characters in domain names. A domain name containing non-ASCII characters (such as `www.Alliancefrançaise.nu) is converted into an ASCII-compatible encoding (ACE, such as www.xn--alliancefranaise-npb.nu). The ACE form of the domain name is then used in all places where arbitrary characters are not allowed by the protocol, such as DNS queries, HTTP Host` fields, and so on. This conversion is carried out in the application; if possible invisible to the user: The application should transparently convert Unicode domain labels to IDNA on the wire, and convert back ACE labels to Unicode before presenting them to the user.

Python supports this conversion in several ways: the `idna codec performs conversion between Unicode and ACE, separating an input string into labels based on the separator characters defined in section 3.1 of RFC 3490 <3490#section-3.1> and converting each label to ACE as required, and conversely separating an input byte string into labels based on the . separator and converting any ACE labels found into unicode. Furthermore, the socket module transparently converts Unicode host names to ACE, so that applications need not be concerned about converting host names themselves when they pass them to the socket module. On top of that, modules that have host names as function parameters, such as http.client and ftplib, accept Unicode host names (http.client then also transparently sends an IDNA hostname in the Host` field if it sends that field at all).

When receiving host names from the wire (such as in reverse name lookup), no automatic conversion to Unicode is performed: applications wishing to present such host names to the user should decode them to Unicode.

The module !encodings.idna also implements the nameprep procedure, which performs certain normalizations on host names, to achieve case-insensitivity of international domain names, and to unify similar characters. The nameprep functions can be used directly if desired.

Return the nameprepped version of *label*. The implementation currently assumes query strings, so `AllowUnassigned` is true.

Convert a label to ASCII, as specified in 3490. `UseSTD3ASCIIRules` is assumed to be false.

Convert a label to Unicode, as specified in 3490.

:mod:!encodings.mbcs --- Windows ANSI codepage

:synopsis: Windows ANSI codepage

This module implements the ANSI codepage (CP_ACP).

Before 3.2, the *errors* argument was ignored; `'replace' was always used to encode, and 'ignore'` to decode.

Support any error handler.

:mod:!encodings.utf_8_sig --- UTF-8 codec with BOM signature

:synopsis: UTF-8 codec with BOM signature

This module implements a variant of the UTF-8 codec. On encoding, a UTF-8 encoded BOM will be prepended to the UTF-8 encoded bytes. For the stateful encoder this is only done once (on the first write to the byte stream). On decoding, an optional UTF-8 encoded BOM at the start of the data will be skipped.